selfservice Posted August 28, 2011 Report Share Posted August 28, 2011 (edited) Hi guys, after 2 years i found some spare time and motivation to finish my FM. Now i've a problem with the encoders. They are from AVI Showtech and are 24 step detented encoders. They seems to be glitchy and every step modify the counter of 4 steps or more. Even movin the knob up and down without doing another step makes the counter up or down. Attacched there is a photo of the encoder and a video of the trouble. Can you suggest me something to solve the problem? Kisses Edited August 28, 2011 by selfservice Quote Link to comment Share on other sites More sharing options...
ilmenator Posted August 28, 2011 Report Share Posted August 28, 2011 Well, the obvious would be: get another encoder! Quote Link to comment Share on other sites More sharing options...
m00dawg Posted August 28, 2011 Report Share Posted August 28, 2011 Actually, I sometimes have similar problems with the sammichFM such that I have wondered if it was a software thing? Quote Link to comment Share on other sites More sharing options...
TK. Posted August 28, 2011 Report Share Posted August 28, 2011 No, it's now SW issue. But this can happen if you swapped the connections between the 3 encoder pins! Some encoders have ground at the middle pin, some others at the left pin. Just try it! :) Best Regards, Thorsten. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.