Jump to content

Ebay SID vendor


re create
 Share

Recommended Posts

  • 1 month later...

hey there moonk, can you confirm your SIDs from sidcollector are 100% working in your synth? he has some at the moment for a good price...

thanks.

hi, sorry i haven't been able to test them because i burnt two pads so it's on hold.

i spoke with him on many occassions and he sounds sincere if that's worth any value.

Link to comment
Share on other sites

it is to me i think. thanks. i may give him a go...

Hello oootini,

I'm the 'sidCollector' and I just would like the following information;

maybe it helps you deciding which seller to chose!? :-)

Before shipping SIDs I always re-test each single chip with a specially written software that iterates

through all waveforms on all 3 oscillators and all filter modes. Even in the rare case this does not exhibit

a problem with the chip (or the chip gets damaged during shipping) I'll provide a replacement of course!

No questions asked...

Cheers

@moonk: Good luck with your repair and your SIDs.

Link to comment
Share on other sites

hi androSID, you sound like a stand up guy :) you have mail.

thanks again.

Hello oootini,

I'm the 'sidCollector' and I just would like the following information;

maybe it helps you deciding which seller to chose!? :-)

Before shipping SIDs I always re-test each single chip with a specially written software that iterates

through all waveforms on all 3 oscillators and all filter modes. Even in the rare case this does not exhibit

a problem with the chip (or the chip gets damaged during shipping) I'll provide a replacement of course!

No questions asked...

Cheers

@moonk: Good luck with your repair and your SIDs.

Link to comment
Share on other sites

  • 2 weeks later...
  • 1 month later...

I can also highly recommend sidcolector(or androSID here) from ebay!

I ordered 8x 6581s from him, at a good price point for a possible MB6582.

After tons of emails with him, he convinced me to get the 8580R5s instead, from the reliability and matching pair advantages.

He knows a lot about these chips, and helped me out a lot.

He had already shipped out my 8x 6581s, but was able to grab them before they started the trip to the USA,

and gave me a great exchange difference deal for 8x 8580R5s + 1x 6582 instead!

He tests all of his chips before sending out, and packages them properly to protect them.

So, he will have 8x 6581s available again, if interested, shortly.

Don't PM me about this, if interested in those, since it's up to him.

But you can find him on ebay, or , he is also a member here.

So he MAY reply to this post to tell you how to contact him on those.

Edit: Just to let you know he is a member here by the ID of androSID.

Edited by tonyn41
Link to comment
Share on other sites

So he MAY reply to this post to tell you how to contact him on those.

Hello *!

As already mentioned I have a pack of 4x 6581CBM (== R3) to sell and ready to be shipped.

If anyone is interested just drop me a line...

Cheers,

Frank

post-9877-0-41299300-1323445016_thumb.jp

ps: Of course with full guarantee if DOA!

EDIT: Only 4 of them are left.

Edited by androSID
Link to comment
Share on other sites

  • 4 weeks later...

Hi,

Does anybody know if "basicwayne" is a trusted SID chip vendor?

I have no way of testing the chips yet, so I'd really have to trust him on that!

Thanks

Hello,

I buy 8 SID-Chips(8580) from ebayer: "undabgehtdiepost".

They all working

Ps.: Commodore PSU works to :)

cheers

Philipp

Edited by kHz-tone
Link to comment
Share on other sites

  • 1 month later...
  • 2 weeks later...

Hi, androSID, I need some SID's and reading your post i think you are trustworthy, I will tell you what i need to buy, Please can you tell me how to contact you to explain this?

thanks

Hello oootini,

I'm the 'sidCollector' and I just would like the following information;

maybe it helps you deciding which seller to chose!? :-)

Before shipping SIDs I always re-test each single chip with a specially written software that iterates

through all waveforms on all 3 oscillators and all filter modes. Even in the rare case this does not exhibit

a problem with the chip (or the chip gets damaged during shipping) I'll provide a replacement of course!

No questions asked...

Cheers

@moonk: Good luck with your repair and your SIDs.

Edited by albpower2seq4sid
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
×
  • Create New...