additional inputs on J5 (64e)

[sidmonster]

TK,

from the 64e page:

"On a full-stuffed MIDIbox64E with 64 rotary encoders all 128 inputs are allocated by the rotary encoders like shown in this diagram. A later version of the application will provide 8 additional inputs at port J5 of the core module for connecting 8 buttons."

Is this currently working? If not, do you still plan to do this?

I searched the forum for the answer with no luck, so I thought it a good idea to ask here in case someone else has this question in the future.

Thanks!

[Janis1279]

Hi,

I remember the similar question from this topic:

,#6

Regards,

Janis

Edited October 5, 2011 by Janis1279

[sidmonster]

Hi,

I remember the similar question from this topic:

http://midibox.org/f...__1#entry126897 ,#6

Regards,

Janis

link not working?

[Janis1279]

sorry... , #6

Edited October 5, 2011 by Janis1279

[sidmonster]

sorry... , #6

Thanks for the idea, but this is not the same. Let me explain:

In some applications (like MBSID) J5 can be used for 8 additional digital inputs. The thread you are referring to describes a workaround to use switches with analog inputs and configure the synth or software you are controlling to read any value above 64 as a button on/off press.

The problem is that not all synths or software have this option, so it will not work in every case.

So, pehaps someone else knows the answer to this question about additional inputs on J5?