52 replies to this topic

[Altitude]

ya, getting there slowly..

[grizz]

ya, getting there slowly..

Yay!!!

I'm interested in ~40 of the DR111 006/26 BLK
and 20 of the DR111 006/26 GRY



Cheers,
grizz

[Altitude]

ya'll have motivated me. I'll get the RFQ together this weekend..

[nebula]

I've been quiet lately, but I'm still in!

[kroutshev]

Hi Guys,
i'm interested to buy them for x0xb0x, i like these one "3/04/DRP110 006"

Can i use them for my x0x or i must modify pots before ?
Thanks for your help.
K.

[Altitude]

you will need to chop the pot shafts on the x0x regardless..

[kroutshev]

Ok, i have to cut the pots like when you used knobs provided in ladyada kit, few years ago ;-)
But the diameter is ok. In that case i'm interested !

Edited by kroutshev, 01 February 2012 - 17:23.

[Altitude]

Alright, Just sent the RFQ. I'll just post their reply in the thread instead of PMing everyone..

[kroutshev]

Ok, i'll check dimensions tonight and i will post asap ! Thanks.

[Altitude]

Ok,
Here is the scoop:

"Selco only has stock on one part no. in the 3/04 series.
It is 3/04DRP110-006, gray body, black pointer, line at 90 degrees from flat.
We have an obsolete trio knob that has three colors- gray/black/aqua or gray/black/yellow.
DRN110-006 is in stock.
DR111 gray and black are not in stock.
C111 caps in all colors are in stock."

They have the DR110 006 and all color caps 0,58$ for the knob 0,33$ for the cap

And they have these things for 0.50$ ea

Edited by Altitude, 03 February 2012 - 00:04.

[gtxdude]

Is that 90 degrees clock-wise or counter-clockwise?

[jojjelito]

Oooh, finally a chance to acquire some cool knobs in 3-shot. Are those hard finish only? Never mind. They look cool!
Those 3-shot are actually 4/04/DR 110 006 for the d-shaft and 4/04/TP110 006 for the spline shaft. Gotta give this a short ponder before PM:ing later tonite...
All of a sudden I wanted in. Dangnabbit!

[Altitude]

Oooh, finally a chance to acquire some cool knobs in 3-shot. Are those hard finish only? Never mind. They look cool!
Those 3-shot are actually 4/04/DR 110 006 for the d-shaft and 4/04/TP110 006 for the spline shaft. Gotta give this a short ponder before PM:ing later tonite...
All of a sudden I wanted in. Dangnabbit!

I'm assuming they are D shaft. The colors she says they have is gray/black/aqua and gray/black/yellow

the 3/04 parts they have limited stock of are $0.75 ea

BOTH the DR110 and DRN110 parts are 0.58 ea plus 0.33 for the cap

Edited by Altitude, 04 February 2012 - 03:31.

[kroutshev]

I'll finalize my order that week-end.
Have a nice time.
K

[jojjelito]

D-shaft only... No matter, just on a whim I'll take 50 4/04/DR 110 006 of each color or until the stock is gone.

/J

Edited by jojjelito, 04 February 2012 - 18:39.

[Altitude]

Ok ppl I'd like to get these ordered this week, I'll be sending individual PMs with your totals today.

[kroutshev]

Ok Altitude,
i'm not sure about two colour soft touch collets, they are used in x0xi0 kit and i have asked Brian to be sure about reference.
I suppose that's 3/02/S151 006 Pointer close to shaft. About these knobs do you if i need to order caps or it's already include ? i need those which caps are removable to mount them in the "Bank and Mode selection" x0xb0x potentiometers.
I don't know if i must order about shaft size 6 mm or 1/4 in ?
[Edit]
Ok confirmation from Brian,
3/02/S151 250 quantity = 20


About caps color and quantity reference C151
red 4
Orange 4
Green 4
Blue 4
Yellow 4


The others one i need : 3/04/DRP110 006 and pointer close to flat, Black Body
Quantity and colors for Pointer :
Red 16
Orange 16
Green 16
Blue 16
Yellow 16

If you have advise for x0xb0x use i'm very interested in case i have made a mistake.
Thanks a lot.

K.

Edited by kroutshev, 06 February 2012 - 21:13.

[Altitude]

kroutshev,

Please read my post about what they have stocked, none of the items you indicated are in stock and require a 500 pcs minimum order

[lameth]

And they have these things for 0.50$ ea

YAY!
I looked into the pdf catalogue and did not see these because they aren't in there. They look even better than the 3/04

Only thing is that i can't find these knobs with Grey Base/Black Middle and Red pointer????!!!!!

So my actual wishlist is:

50 RED (if they are available)
50 4/04/DR110 006/26 DK GREY091/BLACK005/BRIGHT GREEN127
50 4/04/DR110 006/26 DK GREY091/BLACK005/BRIGHT AQUA128
50 4/04/DR110 006/26 DK GREY091/BLACK005/MAGENTA129
50 4/04/DR110 006/26 DK GREY091/BLACK005/ORANGE023
50 4/04/DR110 006/26 DK GREY091/BLACK005/YELLOW010
Total: 300

50 DRN110 006/26 BLK
50 C110

please let me know if it's possible

Edited by lameth, 07 February 2012 - 23:34.

[Altitude]

DRN110 are available, all the other stuff is special order other than what I mentioned above