Jump to content

MBSEQV4L Frontpanel PCB Bulk Order


TK.
 Share

Recommended Posts

I'm starting a bulk order for frontpanel PCBs of the MIDIbox SEQ V4 Lite project: http://www.ucapps.de/midibox_seq_lite.html

mbseqv4l_2.jpg

Please add your name and desired quantity to the list if you are interested: http://www.midibox.org/dokuwiki/doku.php?id=tk_mbseqv4l_pcb_bulk_order

The estimated price is ca. 10..20 EUR, depending on the quantity. I will order the PCBs end of november, so that you should receive them before christmas! :smile:

Update:

Again some good news:

Due to the high demand I decided to hand over the bulk order to Tim aka. SmashTV!

This has some advantages:

  • I give it into the hands of a professional (he already improved the Gerber Files! :) )
  • you can order the MBHP_CORE_LPC17 and MBSEQV4L FrontPanel PCB from a single source
  • you will be able to order the PCBs from the Low Value Order Page
    Shipping costs to Europe (e.g. Germany): ca. 5 EUR
  • PCBs will be available by end of november
  • Long-Term availability of both PCBs!

All people who have already added their name to the bulk order list will be informed via PM once the PCBs are available. Therefore it still makes sense to enter your name if you are interested.

Best Regards, Thorsten.

Best Regards, Thorsten.

Link to comment
Share on other sites

  • Replies 127
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

I do agree that the PCB could also be used for other projects, especially since an isolated driver is available (blm_cheapo). Link to usage example

The size is 25x10 cm, it fits over the MBHP_CORE_LPC17 module if two 18mm spacers (-> 36mm) are used.

Advantage of this size: there is no need to cut the LPC-Link interface

Best Regards, Thorsten.

Link to comment
Share on other sites

This will be my first MidiBox build too, i'm so glad I came across this. I would like 2 please.

Please add my name to the list for +1! Thanks, Thorsten!!

You will have to add your names to the list yourselves, otherwise it's not going to happen... Find the link in the first message in this thread.

Link to comment
Share on other sites

This looks great, but before I sign up for a PCB I'm interested in the case that has been mentioned. Will this PCB sit behind an acrylic front panel, or will the buttons and LEDs be exposed?

Well at least the buttons will have to be exposed to be any useful, don't you think? :whistle:

Link to comment
Share on other sites

Well at least the buttons will have to be exposed to be any useful, don't you think? :whistle:

Aha OK maybe I wasn't clear enough, I want to know if there will be a drilled front panel covering the PCB as part of the box or not (similar to Wilba's front panel for the MBSeq full version). The reason I'm asking is that you can see on the photo that there are the 8 BC337 transistors in the right hand top corner of the PCB. These look almost as high as the buttons and I'm not sure how this will be handled.

Hope that's clearer...

David

Link to comment
Share on other sites

These look almost as high as the buttons and I'm not sure how this will be handled.

The height of the (soldered) transistors is 6mm (almost the same as for the LEDs), whereas the height of the buttons is 9.5mm

This means, that the 2mm acryl panel will sit on the top of transistors, LEDs will be under the (transparent) panel.

Christian will continue to work on this once he's back from vacation.

Best Regards, Thorsten.

Link to comment
Share on other sites

The height of the (soldered) transistors is 6mm (almost the same as for the LEDs), whereas the height of the buttons is 9.5mm

This means, that the 2mm acryl panel will sit on the top of transistors, LEDs will be under the (transparent) panel.

Christian will continue to work on this once he's back from vacation.

Best Regards, Thorsten.

OK thanks for the clarification TK, sounds like you've thought of everything :)

I'll go and sign up then!

Cheers

David

Link to comment
Share on other sites

Heheh Nebulers :) 75 is tha even moar lucky numba, birthyear of mah gurl :)

Edit: somehow the quantites are messed up - i fear neither hurolora gets #75 nor i get #76, but we will get #76 and #77, but that number looks lucky, too :) I updated to the correct count of 79, nao :)

Edited by Hawkeye
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share


×
×
  • Create New...