Hello there,
I need help with finishing my MB-6582. What i have is:
- PCB set from smashTV
- all components hooked up
- PSU option B
- all sockets tested (+5, +9, +12, GND)
- Burn the Bootloader into PIC
- I did the MIDI Interface Troubleshooting Guide
- upload testtone_v3b
Than I put a jumper from pin8 to pin27 of SID-Socket but I will get no testtone! I turned on my oscilloscope to measure pin24 & pin 27 form U1_Core1, nothing came out.
Please help me!
Hello there,
I need help with finishing my MB-6582. What i have is:
- PCB set from smashTV
- all components hooked up
- PSU option B
- all sockets tested (+5, +9, +12, GND)
- Burn the Bootloader into PIC
- I did the MIDI Interface Troubleshooting Guide
- upload testtone_v3b
Than I put a jumper from pin8 to pin27 of SID-Socket but I will get no testtone! I turned on my oscilloscope to measure pin24 & pin 27 form U1_Core1, nothing came out.
Please help me!