Jump to content

Let`s go for my first midibox DIY - BLM


Lamouette
 Share

Recommended Posts

hi

I just saw the livid pads. yes it seems surface mount leds would be needed.

shouldn't be too hard in eagle to redesign the pcb to connect up the leds.

i do not know the terminology but there should be a download for the pcb

contact footprint for the pad. im sure i downloaded this a while ago.

import into eagle then draw traces on the bottom layer and via them up into the middle

on the button ( on the top layer)where you want the leds to be.

I was playing around with this a few weeks ago, drawing traces and managed to save a custom part so it can be done.

when i get around to buying a few pads spacers i shall give it a go,

I would then print a (home made) pcb and use an arduino to connect to max msp via serial.

if you get stuck on eagle give me a shout. there is a part 2 of the video above also.

peace.

Edited by harps
Link to comment
Share on other sites

  • 2 years later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
×
  • Create New...