zener

Possible a lcd display with 6-8 rows?

6 posts in this topic

hay guys

checked around for more than 2 hours (no info found)

about possibility to drive a 6-8 rows lcd display

with midibox hardware

please somebody have some info about ?

thanks

Z.

Share this post


Link to post
Share on other sites

Compatibility mostly depends on the LCD driver. Could you please provide a datasheet about the display you would like to connect?

Edited by Nasrudin

Share this post


Link to post
Share on other sites

You can always use a GLCD. A 128x64 can display quite a few rows depending on the font you use (small 3x5 font, 2 pixel row spacing = 9 rows or the "regular" 5x7 font with 2 pixel row spacing = 7 rows).

Share this post


Link to post
Share on other sites

The first one you linked has a T6963C controller. Now you need to figure out if it's supported by MIOS yet. Go to ucapps.de and check under "LCD module".

The first one you linked has a KS0108B controller. Now you need to figure out if it's supported by MIOS yet. Go to ucapps.de and check under "LCD module".

Share this post


Link to post
Share on other sites

thanks "nils" .....

i'm checking tons of pages about midibox .....

(unfortunately not so fast ...)

my "target" is verify if is possible make a midibox as remote synth programmer" control

with much parameters as possible showed in more then 1 lcd display (like "ma-ckie" c4 control)

z.

The first one you linked has a T6963C controller. Now you need to figure out if it's supported by MIOS yet. Go to ucapps.de and check under "LCD module".

The first one you linked has a KS0108B controller. Now you need to figure out if it's supported by MIOS yet. Go to ucapps.de and check under "LCD module".

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now