Jump to content

MagJack SI-60024-F


EsotericLabs
 Share

Recommended Posts

The LPC17 core will work fine without an Ethernet MagJack.

Depending on your connectivity requirements, you can leave out some more components, e.g. for a USB-powered SEQ V4 Lite... but it is generally recommended to fully populate the boards as it is only a few dollars more, and you have a reusable standard module, then. The MagJack is a bit of an exception, as it can be quite expensive and hard to get. You can always solder the Jack on later, when you need MIDI over ethernet :)

Bye,

Peter

Link to comment
Share on other sites

  • 7 months later...
  • 2 weeks later...

I just tested it today, but it does not seem to be working.

 

[6707.368] [network_device_init] link speed determined
[6707.468] [network_device_init] link available
[6708.168] [network_device_init] lost link

This is what i get in the MIOS Terminal.

 

After that i tried another a 10/100 Switch instead of the 10/100/1000 Switch and then it doesn't do anything. Maybe the tolerances are different, i don't know. Guess i will have to look for MagJack instead.

Link to comment
Share on other sites


Guess i will have to look for MagJack instead.

 

In the same time I made a "round" of the MagJack manufacturers and I found an equivalent of the SI-60024-F: It is the Hanrun HY931110C.

The only differences are the diameter of the pins which are slightly bigger and the LEDs which are simple LED and not duoLED.

I made an Eagle library and I will use this reference on the upcoming LPC1769 core I'm designing.

I'm in communication with Hanrun for a big order for a future BO, the price should be 2€ each.

 

Best regards,

Jerome.

Link to comment
Share on other sites

  • 4 months later...

Hallo. I'm new to this forum, but I hang around on www.groupdiy.com and I've built a fair bit of DIY electronics before (G-1176 compressors, G9 tube mic pres, gssl compressors, API 312 mic pre clones, LA-2A tube compressor clone, own design vari-mu tube compressor ... )

Just started with the LPC17 core build. Looks like a wonderful project. It's obvious that there's been a lot of thought gone into this. Thanks.

I'm also looking for source of the specified magjack si-60024-f RJ45 connector for Ethernet.

They can be ordered from digikey.nl with part number 380-1117-ND 4.71 ex VAT.

 

Would anyone in Europe be interested in a group buy? I'd be in for 4 myself.

Link to comment
Share on other sites

  • 4 weeks later...

I need a couple as well. But i am not in a big hurry. So if me ordering another 4 takes your order over 100 dollar, i am willing to participate. Otherwise i am gonna wait until i need something more. Paying more shipping costs then for parts feels wrong ;)

Link to comment
Share on other sites

  • 3 months later...

I'm also looking for source of the specified magjack si-60024-f RJ45 connector for Ethernet.

They can be ordered from digikey.nl with part number 380-1117-ND 4.71 ex VAT.

 

Would anyone in Europe be interested in a group buy? I'd be in for 4 myself.

 

 

 

Digikey is out of stock until March 2014, anywhere else?

Edited by renegadebliss
Link to comment
Share on other sites

  • 1 month later...

So Digikey are still out until end of March.  

 

I did find here:

http://ucapps.de/mbhp/mbhp_core_lpc17_orderlist.txt

 

Reichelt doesn't sell the MagJack
        There are several hobbyist distributors for these components, e.g.
        http://www.csd-electronics.de
          o MagJack 8 polig print 4xLED (#015-54085) for 3.49 EUR
 
So I see that they actually have some now for 3.95 Euro.
 
But I'm still trying to find somewhere stateside to get these, do you think that these will work from Sparkfun?:
 
 
here's the datasheet for it:
 
 
 
Can I use this for the LPC17CORE?
 
 
Thanks!
 
 
 
 
Link to comment
Share on other sites

  • 3 weeks later...
  • 2 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
×
  • Create New...