Jump to content

LPC17 core not recognized


tonedef
 Share

Recommended Posts

Okay so my core isn't being recognized by MIOS Studio (or anything else). LED flashes, looks like it boots etc. but it won't come up. Bad flash?

I have the LPC Link separated. Since it's on headers, I went ahead and tried to flash it again, but now it's showing up as "Ed:02: Failed on connect: Ee(92). Unknown error" in the IDE for OSX. On windows, still can't flash, but I get "02: Failed on connect: Ep(01). Target marked as not debuggable." instead.

I tried booting into the ISP bootloader (GND the ISP pin, #51->#54) no go, even with flashmagic over ethernet (can't communicate). Any ideas?

Link to comment
Share on other sites

:whistle: oops... found my dumbass problem. all good, sorry for the post!

Very strange!

What do you mean with "won't come up" - what is missing, a LCD message?

How does it behave in Bootloader Hold Mode?

(Jumper J27 stuffed)

Best Regards, Thorsten.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
×
  • Create New...