tonedef Posted August 9, 2012 Report Share Posted August 9, 2012 Okay so my core isn't being recognized by MIOS Studio (or anything else). LED flashes, looks like it boots etc. but it won't come up. Bad flash? I have the LPC Link separated. Since it's on headers, I went ahead and tried to flash it again, but now it's showing up as "Ed:02: Failed on connect: Ee(92). Unknown error" in the IDE for OSX. On windows, still can't flash, but I get "02: Failed on connect: Ep(01). Target marked as not debuggable." instead. I tried booting into the ISP bootloader (GND the ISP pin, #51->#54) no go, even with flashmagic over ethernet (can't communicate). Any ideas? Quote Link to comment Share on other sites More sharing options...
TK. Posted August 12, 2012 Report Share Posted August 12, 2012 Very strange! What do you mean with "won't come up" - what is missing, a LCD message? How does it behave in Bootloader Hold Mode? (Jumper J27 stuffed) Best Regards, Thorsten. Quote Link to comment Share on other sites More sharing options...
tonedef Posted August 16, 2012 Author Report Share Posted August 16, 2012 :whistle: oops... found my dumbass problem. all good, sorry for the post! Very strange! What do you mean with "won't come up" - what is missing, a LCD message? How does it behave in Bootloader Hold Mode? (Jumper J27 stuffed) Best Regards, Thorsten. Quote Link to comment Share on other sites More sharing options...
TK. Posted August 17, 2012 Report Share Posted August 17, 2012 fine! :) Best Regards, Thorsten. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.