pingosimon Posted November 23, 2012 Report Share Posted November 23, 2012 I have a MB-6582 stuffed with 8 SIDs. I can't figure out how to make the random patch generator (lead engine) apply to all the cores. It seems to only apply to Core 1, even when I have all 4 SID buttons selected. Quote Link to comment Share on other sites More sharing options...
TK. Posted November 25, 2012 Report Share Posted November 25, 2012 It works at my side - which firmware version are you using? And did you update the firmwares of all slaves as well? (Press MENU button during startup) Best Regards, Thorsten. Quote Link to comment Share on other sites More sharing options...
pingosimon Posted November 28, 2012 Author Report Share Posted November 28, 2012 (edited) I'm using MIOS v 1.9g and MidiboxSID v 2.041 I was using Midibox SID v 2.037, but I just updated - same problem. I'm using the file setup_mb6582.hex (It's a MB6582 stuffed with 6581 SIDs) I tried cloning the slaves by holding Menu at startup- same problem. Though, the cloning process does seem very fast. My jumper at J11 is bridging the pins to make Core1 the master, like it should be. All else seems fine, I just can't get the random generator to work on more than one core simultaneously. I can get it to work on each core individually. Edited November 28, 2012 by pingosimon Quote Link to comment Share on other sites More sharing options...
TK. Posted November 28, 2012 Report Share Posted November 28, 2012 All else seems fine, I just can't get the random generator to work on more than one core simultaneously. I can get it to work on each core individually. Ok, now I understand your initial posting. It isn't the problem that random patches can't be sent to the slave cores, but that they are only sent to the first selected core. Which means for example, that if SID2 and SID3 are selected, the patch will only be sent to SID2 From programmer's perspective this makes a difference. ;) Best Regards, Thorsten. Quote Link to comment Share on other sites More sharing options...
pingosimon Posted November 29, 2012 Author Report Share Posted November 29, 2012 ah, I see. So there's no way to quickly get the same random patch to all 4 cores? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.