audiomobster Posted December 24, 2013 Report Share Posted December 24, 2013 (edited) I'm posting this, as I didn't find anything similar, just to share my experience. I'm using fluorescent acrylic colours from Daler-Rowney for my engravings inlay. I stroke the colour from all four directions into the engravings with mixed results. After drying the colour I scratched away the rests with a fingernail and took some colour out of the engravings. Aceton works better as you can see on the backpanel. I'll apply the colour a second time then it should work. Regards, Uli Final result, I filled the missing pieces with a bristle brush. This works much better than a hair brush. Then I removed the protruding colour with a credit card and cleaned everything with Aceton. Edited December 25, 2013 by audiomobster Quote Link to comment Share on other sites More sharing options...
Magus517707 Posted January 19, 2014 Report Share Posted January 19, 2014 Such a great Idea! I plan on doing this with my MB-6582 build. Made buying my panels significantly cheaper. Thanks. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.