Lamouette Posted April 3, 2014 Report Share Posted April 3, 2014 (edited) Allo ! :rofl: I have a problem with my AOUT_NG, impossible to have voltage on the CV outs, i have read alot, checked everything but can't find the problem :no: I tested with single ground, double ground, but impossible to have something else than 0V My SEV4 is powered from an external power supply, everything else work but the AOUT_NG I have 12V at IC3, and IC4, led is up, the mid IC don't fell too hot, i have also modified the Firmware, and set it to 3. What i can check to be sure i donmt have others problem ? Thanks for your help. Bye ! Edited April 3, 2014 by Lamouette Quote Link to comment Share on other sites More sharing options...
sneakthief Posted April 3, 2014 Report Share Posted April 3, 2014 Sorry if this is an obvious question, but do you have +/-12V? You only mention +12V (and not -12V) and I can only make out 2 yellow wires going into J3. J3: Analog power in (+12V/GND/-12V) http://www.midibox.org/dokuwiki/aout_ng Quote Link to comment Share on other sites More sharing options...
Lamouette Posted April 3, 2014 Author Report Share Posted April 3, 2014 Yes, i have the +12/-12/0v connected.to J3. Quote Link to comment Share on other sites More sharing options...
latigid on Posted April 4, 2014 Report Share Posted April 4, 2014 Did you correctly change the sequencer output to AOUT1-8? The default will be USB, MIDI, IIC etc. Failing that you could try the TEST AOUT PIN program from the Core, it should be somewhere on ucapps.de Bonne chance, Andy Quote Link to comment Share on other sites More sharing options...
Lamouette Posted April 4, 2014 Author Report Share Posted April 4, 2014 Hello, Yep, i changed it to AOUT Channel 1, I will try to find this. Thanks. Bye Quote Link to comment Share on other sites More sharing options...
Schrabikus Posted April 4, 2014 Report Share Posted April 4, 2014 (edited) How did you connect it? 1:1 or CORE SO - AOUT_NG pin4 CORE SC - AOUT_NG pin5 CORE RC1 - AOUT_NG pin3? Edited April 4, 2014 by Schrabikus Quote Link to comment Share on other sites More sharing options...
Lamouette Posted April 7, 2014 Author Report Share Posted April 7, 2014 Hum, looks like a connected it 1:1, i will check this tonight ! More news tommorow ! Quote Link to comment Share on other sites More sharing options...
TK. Posted April 7, 2014 Report Share Posted April 7, 2014 Ok, it won't work with a 1:1 connection Best Regards, Thorsten. Quote Link to comment Share on other sites More sharing options...
Lamouette Posted April 8, 2014 Author Report Share Posted April 8, 2014 Shame on me :rolleyes: ! Here is a SEQV4 totally working, with an axternal PSU, AOUT_NG, QUAD ICC ! I'm working on a tilted metal case, to fit everything inside ! I'M so happy guyz ! I already played a lot with it, it's just so good, A really good job, and i think lot of work for you ! Cheers TK, and Thanks for all the midibox community, which is just for me the best community in DIY (Shared with MI :smile: ) Here is an happy guy ! :purple: Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.