lazerbeat Posted June 7, 2014 Report Share Posted June 7, 2014 A couple of very small ideas for the firmware. 1 slight tweak of the WT page. At the moment this page is just a little confusing. At least for me. If you are using a smaller screen you cant see the CC and the values you are going to send on the same page. Also having the values before the CC and separated by the "rate" and "sync" commands is a little counter intuitive? This might be a bit clearer? Step / Mode / CC#1 / #1 / CC#2 / #2 / CC#3 / #3 / Rate / Sync 0 -- 21 +0 23 +0 83 +0 0 Note 2 - Initial Delay on EG5 I was wondering if it would be possible to add an initial delay to EG5. It might allow for some interesting and expressive sounds? So instead of ADDSR DADDSR Might be useful and maybe no toooo hard to add? Thanks for reading! Quote Link to comment Share on other sites More sharing options...
TK. Posted June 7, 2014 Report Share Posted June 7, 2014 To 1) in src/cs_menu_tables.inc you will find following table: ========================================================================== ; The wavetable menu ; ========================================================================== CS_MENU_TABLE_WT db (CS_MENU_TABLE_WT_End-CS_MENU_TABLE_WT)/CS_MENU_ENTRY_LEN, 0x00 ;; Register (00=dummy) |<-->| max print ix, exec ix parameter transfer CS_MENU_ENTRY CS_MENU_WT_STEP, "Step", 0x1f+1,PRINT_VAR_WTSTEP, EXEC_SELPAR, R2PP2R_VAR_WTSTEP CS_MENU_ENTRY 0x00, "Mode", 0x03, PRINT_VAR_WTMODE, EXEC_TOGPAR, R2PP2R_VAR_WTPAR CS_MENU_ENTRY 0x01, " #1 ", 0xff, PRINT_VAR_WTPAR, EXEC_SELPAR, R2PP2R_VAR_WTPAR CS_MENU_ENTRY 0x02, " #2 ", 0xff, PRINT_VAR_WTPAR, EXEC_SELPAR, R2PP2R_VAR_WTPAR CS_MENU_ENTRY 0x03, " #3 ", 0xff, PRINT_VAR_WTPAR, EXEC_SELPAR, R2PP2R_VAR_WTPAR CS_MENU_ENTRY MBFM_Px_WT_RATE, "Rate", 0x7f, PRINT_Px_DEC, EXEC_SELPAR, R2PP2R_Px CS_MENU_ENTRY MBFM_Px_CTRL2_U, "Sync", 0x02, PRINT_Px_WTSYNC, EXEC_TOGPAR, R2PP2R_Px CS_MENU_ENTRY MBFM_Px_WT_PAR1, "CC#1", 0x7f, PRINT_Px_CCASG, EXEC_SELPAR_ASG, R2PP2R_Px CS_MENU_ENTRY MBFM_Px_WT_PAR2, "CC#2", 0x7f, PRINT_Px_CCASG, EXEC_SELPAR_ASG, R2PP2R_Px CS_MENU_ENTRY MBFM_Px_WT_PAR3, "CC#3", 0x7f, PRINT_Px_CCASG, EXEC_SELPAR_ASG, R2PP2R_Px CS_MENU_TABLE_WT_End Here you could re-order the menu items to test if you are satisfied with the result. Once you are happy, and for the case that more people would like to get this change, I would change this in the official firmware To 2) I understand your wish (I had the same, and implemented in MBSID V2) But for MBFM it isn't possible due to memory limitations and design decisions which make it difficult today to add such changes, as simple they might sound for you as a user... Please note also, that the MBFM project is only in "maintenance mode" anymore, which means: only bugfixes and minor changes which don't need much attention from my side will be provided. Best Regards, Thorsten. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.