Navicat Posted March 11, 2015 Report Share Posted March 11, 2015 I want to built a Midi to CV/Gate. A DAW will feed the module with midi and Instruments will be triggered. I need Midi in/through and USB midi, 16x CV and 16 Gates. My Idea about what to be used is : STM32F4 Core 2x AOUT_NG for 16 CV 1x DOUTx4 for 16 Gate triggers Midi In and Thru and Midi USB Is MIDIbox NG suitable for me??? Quote Link to comment Share on other sites More sharing options...
Navicat Posted March 19, 2015 Author Report Share Posted March 19, 2015 *BUMP* PLZ Guys!! Can someone answer me that simple question?? I am asking again. I Need a module that will only receive Midi. 1x DOUTx4 will give 16 Gate triggers 2x AOUT_NG will be daisy-chainned to give 16 CV channels for output a CV trigger that will control the velocity Serial Midi in/Thru and usb MIDI is what i need An STM32F4 Core will be used. Is MIDIbox_NG suitable for this minimal module? In Simple words.. I need a MIDI to 16 CV & 16 GATE Interface Quote Link to comment Share on other sites More sharing options...
latigid on Posted March 19, 2015 Report Share Posted March 19, 2015 Sounds more like MIDIbox CV no? As far as I know only 8 CV channels are possible, but you might be able to have more gates. You'll need a level shifter if you want more than 3(.3) V gates i.e. 5 V or greater. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.