latigid on Posted July 13, 2015 Report Posted July 13, 2015 This is a bulk order thread for the BLM I've designed. Please post here with the quantities you desire. I will leave the order open until Sunday July 26. Note that I will give preference to those ordering both the PCB and case as the main goal is to have a complete system at the most affordable price for all.The original concept is here:Here is a rundown of the costs in USD:PCBs:Main BLM PCB: 75miniCore PCB: 4Mouser components (available soon as shopping carts):BLM: 247.97miniCore: 9.49 (excluding PIC, available from SmashTV)The main cost of the Mouser cart is LEDs. If groups wanted to order over 1000 pieces then savings of around $45 are possible. Also the red LEDs are somewhat cheaper.Buttons:18 pieces of 4x4: 108, depending on where you order from.single shift button: 1These are available from adafruit and various other sellers like flikto.de. There are discounts available, but one has to order over 99 pieces...3 mm acrylic spacer from Formulor/Ponoko:~55 depending on where you order from.Case, including shipping to you worldwide:285 (>4 pieces)250 (>9 pieces)I will have to add a few extra studs to increase stability, so it's possible that these might be a few dollars more.Hardware:M2 grub screw, washer and nut in stainless steel: 120xM3 washer and nut ~34xwhite square LEDs to fit Bourns sliders: 1Shipping is ridiculous from here. I will post when next travelling to the EUEstimated cost:CH: 12 or pickupDE: 12EU: 25International: 28Payment can be made by bank transfer or PayPal (with fees paid or 4% added for the latter) Quote
latigid on Posted July 13, 2015 Author Report Posted July 13, 2015 (edited) Please update the following table as appropriate: Name PCB BLM PCB miniCore Case Shift button M2 hardware 4xLED availability 9 9 - 12 9 20 latigid on 1 1 1 1 1 1 Total 1 1 1 1 1 1 Edited July 13, 2015 by latigid on Quote
Rowan Posted July 13, 2015 Report Posted July 13, 2015 Hi, I'm in......... Name PCB BLM PCB miniCore Case Shift button M2 hardware 4xLED availability 9 9 - 12 9 20 latigid on 1 1 1 1 1 1 Rowan 1 1 1 1 1 1 Total 2 2 2 2 2 2 Quote
Phatline Posted July 13, 2015 Report Posted July 13, 2015 Name PCB BLM PCB miniCore Case Shift button M2 hardware 4xLED availability 9 9 - 12 9 20 latigid on 1 1 1 1 1 1 Rowan 1 1 1 1 1 1 Phatline 2 2 1 1 1 1 Total 4 4 3 3 3 3 Great work! Quote
TK. Posted July 13, 2015 Report Posted July 13, 2015 Finally a stable design for jam sessions so that I can put the prototype into the MIDIbox museum - thanks for the great work!!! :thumbsup: Name PCB BLM PCB miniCore Case Shift button M2 hardware 4xLED availability 5 5 - 9 6 17 latigid on 1 1 1 1 1 1 Rowan 1 1 1 1 1 1 Phatline 2 2 1 1 1 1 TK 1 1 1 1 1 1 Total 5 5 4 4 4 4 Best Regards, Thorsten. Quote
Altitude Posted July 13, 2015 Report Posted July 13, 2015 Name PCB BLM PCB miniCore Case Shift button M2 hardware 4xLED availability 5 5 - 9 6 17 latigid on 1 1 1 1 1 1 Rowan 1 1 1 1 1 1 Phatline 2 2 1 1 1 1 TK 1 1 1 1 1 1 Altitude 1 1 1 1 1 1 Total 6 6 5 5 5 5 Quote
latigid on Posted July 13, 2015 Author Report Posted July 13, 2015 (edited) Thanks Thorsten for the firmware updates to get it working and the brilliant platform to begin with! Looking forward to those other modes, whatever they turn out to be. Och, I should say that I can either take payments via SEPA transfer (I think that's free) or PayPal. But in the latter case I would have to add 4% fees... Just to clarify availability: I'm assuming a new run of 10 PCBs with minor trace fixes, but I might build just one more to be 100% certain... Let me think about this. And I only have 9 pieces of the M2 hardware left, which can be found in hardware stores or easily on eBay from Bolt Base. It's just for convenience's sake, and I won't need them for other projects. I think the white LEDs for the sliders work well with the Blue/Green/Cyan colour scheme, but if you like you can get other colours like red, green, orange (TTSH) etc. as standard directly from Mouser. It's no problem to do a larger PCB run if the demand is there. Edited July 13, 2015 by latigid on 1 Quote
rwo Posted July 13, 2015 Report Posted July 13, 2015 I am in! Name PCB BLM PCB miniCore Case Shift button M2 hardware 4xLED availability 5 5 - 9 6 17 latigid on 1 1 1 1 1 1 Rowan 1 1 1 1 1 1 Phatline 2 2 1 1 1 1 TK 1 1 1 1 1 1 Altitude 1 1 1 1 1 1 rwo 1 1 1 1 1 1 Total 7 7 6 6 6 6 Quote
jojjelito Posted July 14, 2015 Report Posted July 14, 2015 (edited) Gotta get me some of this! :) Name PCB BLM PCB miniCore Case Shift button M2 hardware 4xLED availability 4 4 - 8 5 16 latigid on 1 1 1 1 1 1 Rowan 1 1 1 1 1 1 Phatline 2 2 1 1 1 1 TK 1 1 1 1 1 1 Altitude 1 1 1 1 1 1 rwo 1 1 1 1 1 1 jojjelito 1 1 1 1 1 1 Total 8 8 7 7 7 7 Edited July 14, 2015 by jojjelito Quote
tashikoma Posted July 14, 2015 Report Posted July 14, 2015 (edited) i'm in! Sorry not sure for the case so no case :( Name PCB BLM PCB miniCore Case Shift button M2 hardware 4xLED availability 4 4 - 8 5 16 latigid on 1 1 1 1 1 1 Rowan 1 1 1 1 1 1 Phatline 2 2 1 1 1 1 TK 1 1 1 1 1 1 Altitude 1 1 1 1 1 1 rwo 1 1 1 1 1 1 jojjelito 1 1 1 1 1 1 tashikoma 1 1 - 1 1 1 Total 9 9 7 8 8 8 Edited July 14, 2015 by tashikoma Quote
latigid on Posted July 14, 2015 Author Report Posted July 14, 2015 No problem, I will try to accommodate everyone as best as I can. Quote
workspace Posted July 14, 2015 Report Posted July 14, 2015 (edited) I' m in as well! Name PCB BLM PCB miniCore Case Shift button M2 hardware 4xLED availability 0 0 - 4 1 12 latigid on 1 1 1 1 1 1 Rowan 1 1 1 1 1 1 Phatline 2 2 1 1 1 1 TK 1 1 1 1 1 1 Altitude 1 1 1 1 1 1 rwo 1 1 1 1 1 1 jojjelito 1 1 1 1 1 1 tashikoma 1 1 - 1 1 1 workspace 1 1 1 1 1 1 Total 10 10 8 9 9 9 Edited July 14, 2015 by workspace Quote
grizz Posted July 15, 2015 Report Posted July 15, 2015 (edited) Are you able to order extra cases? If so I'm in and will sign up! Edited July 16, 2015 by grizz Quote
latigid on Posted July 16, 2015 Author Report Posted July 16, 2015 Are you able to order extra cases? If so I'm in and will sign up! No limit to the number of cases! PCBs may be subject to certain multiples, e.g. 10,15,20 etc. Quote
flyweight Posted July 16, 2015 Report Posted July 16, 2015 I'm in!!! Name PCB BLM PCB miniCore Case Shift button M2 hardware 4xLED availability 0 0 - 4 1 12 latigid on 1 1 1 1 1 1 Rowan 1 1 1 1 1 1 Phatline 2 2 1 1 1 1 TK 1 1 1 1 1 1 Altitude 1 1 1 1 1 1 rwo 1 1 1 1 1 1 jojjelito 1 1 1 1 1 1 tashikoma 1 1 - 1 1 1 workspace 1 1 1 1 1 1 flyweight 1 1 1 1 1 1 Total 11 11 9 10 10 10 mmm sorry to see that there are no PCB's..... Does this mean i cannot join?? Quote
ganchan Posted July 16, 2015 Report Posted July 16, 2015 i'd like to have the whole pack if you can take more than 10 pcb Thanks Thorsten for the firmware updates to get it working and the brilliant platform to begin with! Looking forward to those other modes, whatever they turn out to be. Och, I should say that I can either take payments via SEPA transfer (I think that's free) or PayPal. But in the latter case I would have to add 4% fees... Just to clarify availability: I'm assuming a new run of 10 PCBs with minor trace fixes, but I might build just one more to be 100% certain... Let me think about this. And I only have 9 pieces of the M2 hardware left, which can be found in hardware stores or easily on eBay from Bolt Base. It's just for convenience's sake, and I won't need them for other projects. I think the white LEDs for the sliders work well with the Blue/Green/Cyan colour scheme, but if you like you can get other colours like red, green, orange (TTSH) etc. as standard directly from Mouser. It's no problem to do a larger PCB run if the demand is there. The new fixed pcb will be on this bulk or a new one? G. Quote
grizz Posted July 16, 2015 Report Posted July 16, 2015 Name PCB BLM PCB miniCore Case Shift button M2 hardware 4xLED availability 0 0 - 4 1 12 latigid on 1 1 1 1 1 1 Rowan 1 1 1 1 1 1 Phatline 2 2 1 1 1 1 TK 1 1 1 1 1 1 Altitude 1 1 1 1 1 1 rwo 1 1 1 1 1 1 jojjelito 1 1 1 1 1 1 tashikoma 1 1 - 1 1 1 workspace 1 1 1 1 1 1 flyweight 1 1 1 1 1 1 Grizz 1 1 1 1 1 1 Total 12 12 10 11 11 11 Quote
latigid on Posted July 16, 2015 Author Report Posted July 16, 2015 I'm in!!! Name PCB BLM PCB miniCore Case Shift button M2 hardware 4xLED availability 0 0 - 4 1 12 latigid on 1 1 1 1 1 1 Rowan 1 1 1 1 1 1 Phatline 2 2 1 1 1 1 TK 1 1 1 1 1 1 Altitude 1 1 1 1 1 1 rwo 1 1 1 1 1 1 jojjelito 1 1 1 1 1 1 tashikoma 1 1 - 1 1 1 workspace 1 1 1 1 1 1 flyweight 1 1 1 1 1 1 Total 11 11 9 10 10 10 mmm sorry to see that there are no PCB's..... Does this mean i cannot join?? Please see post above: if you don't fit into a multiple like 10, 15, 20 PCBs etc, then you can go onto a waiting list for the next batch. Let's see how many are requested. Looks like a big trip to the post already! i'd like to have the whole pack if you can take more than 10 pcb The new fixed pcb will be on this bulk or a new one? G. Likewise, no problem for more PCBs or cases. The PCB you will get will be a new revision. 1 Quote
blingy Posted July 16, 2015 Report Posted July 16, 2015 (edited) I'm in minus a case Name PCB BLM PCB miniCore Case Shift button M2 hardware 4xLED availability 0 0 - 4 0 11 latigid on 1 1 1 1 1 1 Rowan 1 1 1 1 1 1 Phatline 2 2 1 1 1 1 TK 1 1 1 1 1 1 Altitude 1 1 1 1 1 1 rwo 1 1 1 1 1 1 jojjelito 1 1 1 1 1 1 tashikoma 1 1 - 1 1 1 workspace 1 1 1 1 1 1 flyweight 1 1 1 1 1 1 Grizz 1 1 1 1 1 1 blingy 1 1 0 1 1 1 Total 13 13 10 12 12 12 Edited July 16, 2015 by blingy Quote
Macotronic Posted July 16, 2015 Report Posted July 16, 2015 (edited) Hi guys im in but only the pcbs, have the seq4 first on the line, great project Edited July 16, 2015 by Macotronic Quote
latigid on Posted July 17, 2015 Author Report Posted July 17, 2015 Name PCB BLM PCB miniCore Case Shift button M2 hardware 4xLED latigid on 1 1 1 1 1 1 Rowan 1 1 1 1 1 1 Phatline 2 2 1 2? 1 1 TK 1 1 1 1 1 1 Altitude 1 1 1 1 1 1 rwo 1 1 1 1 1 1 jojjelito 1 1 1 1 1 1 tashikoma 1 1 - 1 - 1 workspace 1 1 1 1 1 1 flyweight 1 1 1 1 1 1 Grizz 1 1 1 1 1 1 blingy 1 1 - 1 - 1 ganchan 1 1 1 1 ? 1 Macotronic 1 1 - - - - Total 15 15 10 14 10 13 FYI, you can keep the table tidy by using the code "< >" formatting. The shift button and M2 hardware are now maxed out. If you're still interested just put a question mark on these and if it goes over 10 I'll consider ordering more. 1 Quote
sbm Posted July 20, 2015 Report Posted July 20, 2015 I'm in as well, looks like on a waiting list possibly, but definitely quantity of 1 each. Quote
Jack Posted July 20, 2015 Report Posted July 20, 2015 (edited) Name PCB BLM PCB miniCore Case Shift button M2 hardware 4xLED latigid on 1 1 1 1 1 1 Rowan 1 1 1 1 1 1 Phatline 2 2 1 2? 1 1 TK 1 1 1 1 1 1 Altitude 1 1 1 1 1 1 rwo 1 1 1 1 1 1 jojjelito 1 1 1 1 1 1 tashikoma 1 1 - 1 - 1 workspace 1 1 1 1 1 1 flyweight 1 1 1 1 1 1 Grizz 1 1 1 1 1 1 blingy 1 1 - 1 - 1 ganchan 1 1 1 1 ? 1 Macotronic 1 1 - - - - Jack 1 1 1 1 1 1 Total 16 16 11 15 11 14 Edited July 20, 2015 by Jack Quote
latigid on Posted July 21, 2015 Author Report Posted July 21, 2015 (edited) Name PCB BLM PCB miniCore Case Shift button M2 hardware 4xLED latigid on 1 1 1 1 1 1 Rowan 1 1 1 1 1 1 Phatline 2 2 1 2? 1 1 TK 1 1 1 1 1 1 Altitude 1 1 1 1 1 1 rwo 1 1 1 1 1 1 jojjelito 1 1 1 1 1 1 tashikoma 1 1 - 1 - 1 workspace 1 1 1 1 1 1 flyweight 1 1 1 1 1 1 Grizz 1 1 1 1 1 1 blingy 1 1 - 1 - 1 ganchan 1 1 1 1 ? 1 Macotronic 1 1 - - - - sbm 1 1 1 ? ? 1 Jack 1 1 1 ? ? 1 Total 17 17 13 14 10 15 Edited July 21, 2015 by latigid on Quote
tabularasa Posted July 21, 2015 Report Posted July 21, 2015 Name PCB BLM PCB miniCore Case Shift button M2 hardware 4xLED latigid on 1 1 1 1 1 1 Rowan 1 1 1 1 1 1 Phatline 2 2 1 2? 1 1 TK 1 1 1 1 1 1 Altitude 1 1 1 1 1 1 rwo 1 1 1 1 1 1 jojjelito 1 1 1 1 1 1 tashikoma 1 1 - 1 - 1 workspace 1 1 1 1 1 1 flyweight 1 1 1 1 1 1 Grizz 1 1 1 1 1 1 blingy 1 1 - 1 - 1 ganchan 1 1 1 1 ? 1 Macotronic 1 1 - - - - sbm 1 1 1 ? ? 1 Jack 1 1 1 ? ? 1 tabularasa 1 1 1 ? ? 1 Total 18 18 14 14 10 16 I'm in with one of each. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.