jbdiver Posted December 23, 2015 Report Share Posted December 23, 2015 I need to program a couple PIC16F88 chips for a new quad IIc midi module. I downloaded the mbhp_iic_midi_v1_0c.zip file containing the firmware. I'm trying to use a pickit 2 programmer to write the project.hex file to the chip. However, the programmer software reports that it cannot read the hex file. Is there a way to burn the software on these chips using pickkit? Quote Link to comment Share on other sites More sharing options...
Shuriken Posted December 24, 2015 Report Share Posted December 24, 2015 There is a problem with white spaces in the file. Try this project.hex, or remove them yourself and it should be ok. Quote Link to comment Share on other sites More sharing options...
jbdiver Posted December 30, 2015 Author Report Share Posted December 30, 2015 Thank you. Your hex file worked great. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.