Jump to content

Midi merging problem Expression pedal


TauTau
 Share

Recommended Posts

Hi,

I have modded my Peavey Vypyr 120 combo guitar amp, since it only has a dedicated 8-pin connection to the Sanpera pedal, which transports midi and voltage for the pedal. To be able to also use midi signals from a sequencer to control the amp, I split the 8-pin connection up to standard 5-pin and the other three pins separate, putting a midi merger in between. Everything is documented here: http://peavey.com/forum/viewtopic.php?f=33&t=42132&sid=fa2db4d5a14f0699d076a40acd46d0ea

Everything works quite nicely, except the volume pedal of the Sanpera. It does more of an on/off switching and in general is very unpredictable. I captured Midi Data with MidiOX with and without merger (see attachment, part above sysex is without, below with merger, sysex comes from switching the amp on) and can't see any difference.

What I'm trying to find out now, is if there is a generic problem when using a merger in conjunction with midi CCs from an expression pedal, or if only the merger I have sucks ;) I also found this discussion, no idea if that could be relevant: http://www.diystompboxes.com/smfforum/index.php?topic=102792.0

midiox.jpg

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
×
  • Create New...