Jump to content

Rebuilt MBHP_ETH


mongrol
 Share

Recommended Posts

And then I scroll down and see a schematic. only a few slight differences.CS and RESET have 10K pull ups not present in the MBHP ETH schematic, and the MBHP ETH has an extra 100uf cap on the pin 1/2, and 100nf cap on VDDTX (bypass cap). A few resistor values are slightly different. only thing I see as a potential problem is the extra pull ups, which could be desoldered if needed, which I again am no expert and maybe they are fine to leave in....

Link to comment
Share on other sites

It looks like the module is a generic 3.3V SPI module, so it should work. I can't think of any reason why not. Those modules can be bought from Ebay for about $2.5 including ww-shipping. Think I order some to try them out.

Edited by Keeze
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
×
  • Create New...