Jump to content

Sammich SID problem, please help!


lazenbleep
 Share

Recommended Posts

Hi! Long time no speak. 

So, I plugged in my Sammich after a 3 year break (I know, I'm sorry), and there's an issue. There is only some odd low level sounds. At one point I actually heard something like the SID, but it disappeared.

On opening up the box I found that the SIDS are REALLY hot when powered, like they burn to the touch. Any ideas, or starting points for investigation?

It's a pair of 8580's, 1A linear PSU, and it was working before. The mods are the potentiometer mods to A0-A4.

Many thanks!

 

 

SID.jpg

Link to comment
Share on other sites

What are your voltages at the regulators and at the vcc on the pic and at the 8580? I would make sure you  have your voltages set properly. You can test with the sids out so you do not burn them. If the voltage is low you may have a short or have a bad solder or bad component somewhere to find. Maybe you are using the wrong power supply as well. That could be causing a lot of extra heat if the regulators have to dissipate a higher voltage as heat.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
×
  • Create New...