Macotronic Posted October 20, 2018 Report Share Posted October 20, 2018 Hi Im on the hunt to get the part and make it I need -Switches -Potentiometers - MIDIbox Core STM32F4 and pcb -Parts kit I have two Raystar Oleds for the Seqv4 for trade Quote Link to comment Share on other sites More sharing options...
borfo Posted October 20, 2018 Report Share Posted October 20, 2018 (edited) I have a PCB for Wilba's Seq v4 frontpanel, new, nothing soldered to it yet. I have other parts as well that I could probably part with... I have a set of the rotary encoders and a set of the bicolor LEDs... A datawheel knob... I have an assembled LPC17 core that I could get rid of as well - it's a totally functional core for the time being, although as the SEQ forks off into the V4+ you'll miss out on some functionality down the road. You can always upgrade the core though. I could put together a set of knobs that would fit the encoders, but they're potentiometer knobs, so they've got that position indicator stripe on them, and I might have to mix up colors a bit, not sure if I have 16 of any one color... Anyway, not the prettiest knobs on the block, but they would work. I have an assembled STM32F4 core as well that isn't being used right now, but I think I want to keep it. What color are the OLEDs? Where are you located? Anyway, let me know if you're interested in any of that. Edited October 20, 2018 by borfo Quote Link to comment Share on other sites More sharing options...
Macotronic Posted October 22, 2018 Author Report Share Posted October 22, 2018 Hi Borfo tomorrow Ill check what color are the oleds. I have already wilba pcb, datawheel knob and the oleds, im interested in the lpc17 core only, the encoders are with button?, and the bicolor leds, what else you have? need the tact switchs also Quote Link to comment Share on other sites More sharing options...
Macotronic Posted October 23, 2018 Author Report Share Posted October 23, 2018 oleds are green Quote Link to comment Share on other sites More sharing options...
borfo Posted October 24, 2018 Report Share Posted October 24, 2018 Hm. If I don't get rid of the frontpanel PCB I shouldn't get rid of the parts either... I could still do the LPC17 core if you like though. Quote Link to comment Share on other sites More sharing options...
Swiss75 Posted October 24, 2018 Report Share Posted October 24, 2018 If there's no interest in the other parts I'd like to have them Quote Link to comment Share on other sites More sharing options...
mantaray Posted October 24, 2018 Report Share Posted October 24, 2018 (edited) I may have many of the parts you need. I just can't see me ever getting this built - every potential avenue towards finding a builder seems to meet a dead end. I think I have Wilba front panel PCB, parts kit, STM32F4 core, plus some MIDI boards. I will have to check what I've got, it may take a few days for me to look through the cupboard and find/check everything! Edited October 24, 2018 by mantaray Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.