Jump to content

AOUT NG Troubleshooting


goyousalukis
 Share

Recommended Posts

Hey guys,

I am looking for some help. I have a MBSeq4 with an AOUT NG connected with the line driver/receiver. 6 of the channels are working perfectly, but I have two issues:

When I test the calibration for each channel with the output set at 8V, I get a constant 11V at output 5, and 0V at output 7. 

I have checked continuity between the outputs and the opamp, along with verified the resistance. I have also verified continuity between the opamp and the DAC.

When I measure the voltages on the DAC pins for a working channel, I get 3V. When I check output 5, it has 4v, and output 7 has 0V.

Do you guys think I fried these two pins on the DAC?

Link to comment
Share on other sites

 

Hey

1 hour ago, goyousalukis said:

Do you guys think I fried these two pins on the DAC?

To me it look like...

There is not that many part at AOUT_NG... the weakest being the DAC

Just double check your measure at TLV5630 output with the TL074s removed

Best

Zam

 

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
×
  • Create New...