Jump to content

PCBs for sale (again) incl. LRE8x2 & STM32F4Disco


FantomXR
 Share

Recommended Posts

Hey people,

I cleaned up my room a bit and found some PCBs I do not need anymore. Here we go:

IMG_20190502_134811.thumb.jpg.812b393b1a

IMG_20190502_135032.thumb.jpg.aa570ea97a

IMG_20190502_135259.thumb.jpg.c6fa1818f4

This is something I developed years ago! It has a PCB with 8 encoders with LED rings. Although they look blue, they are not. The LEDs (0603) are white! As you can see the PCB an be connected to a standard DOUT-module even without any resistors. The LEDs won't get damaged. I did a mistake in the wiring of the LEDs at this point. So if you follow the official LED-Matrix-Pattern, you will get crazy results. But anyway: This is a software-thing. If you change the matrix-pattern, they work perfectly. I'll advice you about it if you buy it.

I have two of those available. On one of them I needed to fix a trace (3rd. picture on the left). But it's perfectly working.

Encoders are Bourns PEC16 with integrated switch. Underneath there are three IDC connectors for the encoders and switches that can be directly connected to a DIN-module.

Price: 30€ each o.b.o.

Next is a LRE:

IMG_20190502_142117.thumb.jpg.f58ddb65f8

IMG_20190502_142123.thumb.jpg.3785f6d922

It has warmwhite LEDs. Lower row is mounted on spacer, the others not. Encoders are PEC16 with integrated switches.
On the switch-header I soldered a flat-cable directly. So if you don't need it you have to remove it.

Price: 35€

 

IMG_20190502_142323.thumb.jpg.352426d23a

This is PCB where you can mount encoders on the top. Necessary shiftregisters have to be mounted on the backside. It's SMD, but can be soldered with a good soldering iron without any problems. No need for SMD-equipment like reflow-oven. 

Price: 3€ each

 

IMG_20190502_142349.thumb.jpg.3a66df3121

STM32F4 Discovery!
Price: 15€ each

 

IMG_20190502_142419.thumb.jpg.c6f2ef58c7

AINSER8-module assembled.
Price: 6€ each

IMG_20190502_142426.thumb.jpg.f77a5ae32b

AINSER8-PCBs. Each PCB includes three layouts. I will not cut those in pieces. You have to do it by yourself.
Price: 4€ each PCB (=> 3 AINSER8 Layouts)

IMG_20190502_142435.thumb.jpg.9d6e705cb9

AINSER64-PCB
Price: 5€ each (two available)

IMG_20190502_142442.thumb.jpg.685a37982a

DIO-Matrix-PCBs. Each PCB includes two layouts. I will not cut those in pieces. You have to do it by yourself.
Price: 4€ each PCB (=> 2 DIO-Matrix Layouts).

IMG_20190502_150155.thumb.jpg.2cf9d159ed

GM5x5x5-PCB
Price: 5€

That's it for now!
I'm located in Berlin, Germany. 

Best,
Chris

Edited by FantomXR
Link to comment
Share on other sites

  • 9 months later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
×
  • Create New...