Phatline Posted September 15, 2019 Report Share Posted September 15, 2019 (edited) I sell my used BLM16x16+X. The Orginal BLM16+16+X has a 8Bit microcontroller, this one has some modifications: * 32Bit Core Module (Micrcontroller) * 2x2 Midi IO * a bootloader switch, if you bricked somehow the device, with this normally you get it to live.... * and a expansion port on the front (AIN, DIN), (which you maybe never need, except your are a programmer...) * I soldered yesterday new Faders, so they are brandnew, they are connected to a Serial AIN Board, so they work with 5V! (normally Faders direct connected to a 32bit MCU needs 3.3V, so less resolution) you could mount 12 more faders or pots into it, or via expansion port (DIY...) * it is 5V USB-Powered, and can be used as USB-Midiinterface, as well there is a sysex protocoll to fast transfair button-led status between a Max-Msp Patch/Ableton live and so on... but for that you have to DIY again * Theoretical it also can be powered from the SEQV4, but for that you have to carefulle check the 8-Pin DIN-Socket on the backside off the Device - this holds 2 extra Midi ins 1 Midiout and +-5V --- but i dont know if it wired correctly - you may have to check that yourself (DIY!) I fully cleaned and checked it yesterday (i completely disasaambled and assambled it) leds are: blue-green-cyan --- and all are working Price: 800 here more detailed Calculation: (without the expansioport, additional midi IO) so you see where the cost is coming from... - i would sell it on sequencer.de - and i think i would find a buyer there - but i cant post there (not enough posts or +-points) -maybe someone can give them a wink... Edited August 23, 2023 by Phatline Quote Link to comment Share on other sites More sharing options...
Phatline Posted August 20, 2023 Author Report Share Posted August 20, 2023 new price 800€ -serviced yesterday. Quote Link to comment Share on other sites More sharing options...
Phatline Posted April 6 Author Report Share Posted April 6 (edited) new price 750€ i combined and wrote the 32bit Code so it now can comunicate with a SEQV4+, and off course with the SEQV4 standard, here is the sourcecode + firmware:BLM_V01.7z see also this short video (german): Edited April 6 by Phatline Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.