Banks and if_equal selections
Hi,
I have the following idea for a controller that I've tried to configure over the past week or so: one 2x40 LCD and 16 encoders to control synth parameters that are displayed on the screen. There's 3-4 "pages" of parameters that I should be able to change between, and each parameter (or most of them anyway) in turn has four separate addresses, depending on the "tone" (oscillator) in the patch you want to edit.
I'm able to change the "pages" if I just bank them, and then use a butto
Here's my test setup:
# Sysex test file 2
# Reset to default
RESET_HW
# Encoder hardware settings
# =========================
ENC n=1 sr=1 pins=0:1 type=detented3
ENC n=2 sr=1 pins=2:3 type=detented3
ENC n=3 sr=1 pins=4:5 type=detented3
ENC n=4 sr=1 pins=6:7 type=detented3
# Menu settings
SCS soft1_button_emu_id=2000 \
soft2_button_emu_id=2001 \
soft3_button_emu_id=2002 \
soft4_button_emu_id=2003 \
shift_button_emu_id=2004 \