Jump to content

MF_NG Module HELP


zennro
 Share

Recommended Posts

Hi everyone ! :)

We bought a MF_NG Module kit to control motorized faders.
We soldered all components on the board. We assembled the pic18f452 with the PICkit2 on a breadboard. With the pickit2 v2.60 application, we charged on it "bootloader-> burner-> bootloader_v1_2b_pic18f452.hex ». The PIC was happy !
-> However, we don’t if we have to put the "midi -> mios8_v1_9h_pic18f452.hex"  program with the picket 2.60 application or the the MIOS Studio application, we tested both but without success…
-> Also, once the pic18f452 is on the MF_NG board, MIOS Studio doesn’t recognize it, does it lack a little program with midi data or do we have a soldering problem ? We can’t verify it because others midi devices doesn’t seems to be recognize either, is it normal ?

Has anybody made this board before ? Can you explain precisely the steps to make it work ? We are a little bit lost in the ucapps website !!
 
Thanks a lot and have a good day !!

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
×
  • Create New...