Jump to content

4x8 Illuminated button PCB


Lorcan
 Share

Recommended Posts

Hi,

I've designed this PCB in KiCAD to hold 4x8 Omron B3W-9000 illuminated switches, as well as integrated DINX4 and DOUTX4.

Price vary quite a bit depending on the distributor, but in the EU I found them at ~2€ each here. The quality seems really quite good, and you can insert a printed transparent label to indicate function.

 

I've used completely separate lines for SI/SO, SC1/SC2 and RC1/RC2 as I understand this is the recommend way to reliably chain modules together in series, in order to not to mess up the timings. Can someone more knowledgeable than me please confirm this, and point out any potential mistakes before I send the files for production ?

I'll put everything on github when I've built the pcb and confirmed everything works as intended.

channel_dio_sw_front.thumb.jpg.6db6c8e443130cc8c2ec3ca5eab677d6.jpg

channel_dio_sw_back.thumb.jpg.5bc606c66dd135d066665101652226b4.jpg

channel_dio_sw_back.thumb.png.f9d98569e30349135fea870784ad41df.png

channel_dio_sw_front.thumb.png.1fed40749d5460f57b2ca22bd28c48a6.png

channel_dio_sw.thumb.png.45a82f74e2aca34a72b17a07ad944c94.png

883797059.png?v=101220.1017380262_1.jpg?width=640&height=480&wat=1&wat_url=_tme-wrk_%2Ftme_new.png&wat_scale=100p&ci_sign=f3bb0877208c76e4f4f3a8561062786e520d7a1cB3W-9000-G1G Omron Electronics Inc-EMC Div | SW1035-ND DigiKey Electronics

 

Link to comment
Share on other sites

  • 4 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
×
  • Create New...