doc Posted February 15, 2004 Report Share Posted February 15, 2004 Hi everybody,by using some sparetime, I want you to have a look at my "working" layout of my MidiboxLc.The Box will be used with Cubase and I "borrowed" a lot of things from the Mackie Controller and from Axels Midibox of the year.It's not the final version but something near to it.I just put the link here because of the filesize (about 500k). The image is quite noisy because of the high compression (the original file has 30 MB).The original size is 1000 x 440 mm.Any comments are welcome ;Dhttp://www.systemhaus-schneider.de/doc/frontplatte3.jpgDoc Quote Link to comment Share on other sites More sharing options...
NorthernLightX Posted February 15, 2004 Report Share Posted February 15, 2004 Nice!I would watch the screw-holes on the right side, by the Display/Aux/Page section, because they interfere with your graphics, I don't think you'll be able to print on a hole, are you? ;) Quote Link to comment Share on other sites More sharing options...
doc Posted February 15, 2004 Author Report Share Posted February 15, 2004 Thank you for the tip.The screw holes must go away there I know. For this I have to change the PCB Layouts again . ;DDoc Quote Link to comment Share on other sites More sharing options...
d2k Posted February 15, 2004 Report Share Posted February 15, 2004 Hey doc...U know u can also use the ledrings as meters too right? Or u just goin for a uberl33t LC? :PPeeshD Quote Link to comment Share on other sites More sharing options...
doc Posted February 15, 2004 Author Report Share Posted February 15, 2004 Hey D2k,what is a "uberl33t" LC ???Yes I know, that the ledrings can be use. But I thought it is a good idea building both into the case. Who knows what tomorrow comes ... ::)doc Quote Link to comment Share on other sites More sharing options...
NorthernLightX Posted February 16, 2004 Report Share Posted February 16, 2004 Hiuber = very (slang, derived from the german word for over)l33t = leet = elite (slang for very cool, nice whatever ;)I'm feeling like a walking dictionary right now  8) Quote Link to comment Share on other sites More sharing options...
doc Posted February 16, 2004 Author Report Share Posted February 16, 2004 Thank you very much,always ready to learn something new! 8)DOC Quote Link to comment Share on other sites More sharing options...
MrMusicman Posted February 17, 2004 Report Share Posted February 17, 2004 Hey Doc.Nice Design.But as I know Cubase does not support more than 1.mackie controler (8ch), so if you will control 16 ch. you haveto use the "Generic Remote", but you will lose somefunction and some thing will be harder to control.good luckKent Quote Link to comment Share on other sites More sharing options...
doc Posted February 17, 2004 Author Report Share Posted February 17, 2004 Hello MrMucicman,thank you for your comment.yes I know (now) that only one controller is supported.But in a future release of cubase it will be supported.(Don't want to drill again in the near future... ;D)Doc Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.