Guest technoland Posted October 19, 2004 Report Share Posted October 19, 2004 hello. I am making midibox 64 and I want to add to him to a ir eye (the sharp gp2d12).where Imust connect the sensor? ??? thank you very much. Quote Link to comment Share on other sites More sharing options...
Guest technoland Posted October 23, 2004 Report Share Posted October 23, 2004 please.anyone it knows if it is possible to connect this tomidibox64?http://www.superrobotica.com/s320103.htm Quote Link to comment Share on other sites More sharing options...
AndrewMartens Posted October 23, 2004 Report Share Posted October 23, 2004 WARNING: I haven't made a Midibox64, have only looked briefly at the layout and at the IR sensor.It should be possible to hook the output of the Sharp GP2D12 sensor to one of the 64 analog inputs. From what I've read, the output is roughly between 0.4V and 2.45V. You would probably need to do some scaling for your device inside of MIOS before transmitting it via MIDI - otherwise you will probably only transmit MIDI values from 10 to 62 or so (again, I'm not sure, just guessing here). Quote Link to comment Share on other sites More sharing options...
Rednas Posted October 23, 2004 Report Share Posted October 23, 2004 Sensor analog output --> Midibox analog inputBut scaling is needed. Where do you want to use it for?Continuous distance --> analog neededTwo steps -> First analog to digital converter. Have the right digital output pin(s) connected to some Digital input (Din). Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.