Jump to content

Encoder specifications


moebius
 Share

Recommended Posts

I'm hoping this is going to be a sticky topic ;)

I'll edit this post or delete it, if it's not needed anymore - all this information is gathered from the forum, and shamelessly copied here - You're welcome to present it in a better form

Bourns PEC11-series detented encoders

(From SmashTV)

Encoder mode: "DETENTED2"

Pinout: (http://www.avishowtech.com/mbhp/images/encspecs17.gif)

Note: the rightmost picture is "top down" (as seen from the top of the encoder looking down to the shaft)

pin "A" goes to D1

pin "C" goes to Vs

pin "B" goes to D0

(This means that, encoder C pin is "common". Encoder B pin goes to lower numbered DIN pin (of two pins assigned to that encoder) and encoder A pin to higher numbered DIN pin.)

the detent can be removed

-----

Thanks go to:

mandingo: http://69.56.171.55/~midibox/forum/index.php?topic=3843.msg25094#msg25094

jdutcher: http://69.56.171.55/~midibox/forum/index.php?topic=3911.msg25766#msg25766

xcoulonx: http://69.56.171.55/~midibox/forum/index.php?topic=3299.msg23699#msg23699

Now - does anyone want to reveal the specs of the encoders from VOTI? What about different ALPS types?

contributions more than welcome ;)

/edit corrected link for moved page

Link to comment
Share on other sites

  • 1 month later...

Right, better late then never...

Specs on VOTI (www.voti.nl) encoders;

M-SW-ROT, detented rotary encoder, price EUR 1,19

Encoder mode: "DETENTED2" (not 100% sure will verify later)

pinout; 

http://www.voti.nl/docs/rotary-encoder.jpg

if you view the encoder from the top with the pins pointing towards you;

left pin goes to D1 (highest numbered din pin)

middle pin goes to D0 (lowest numbered din pin)

right pin goes to Vs

the detent can also be removed

cheers, marcel

edit// oh dear :-[ just found out the pinout i gave is wrong! been standing here for over a year now, so if any of your boxes work backwards you know who's to blame

it's fixed now

Link to comment
Share on other sites

  • 2 years later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
×
  • Create New...