Wise Posted April 22, 2005 Report Share Posted April 22, 2005 I'm in the process of building a case to my Traktor controller. It's going to be a robust flightcase (plywood and alu-profiles): More pictures @ : http://www.gavle.to/~henrik.m/box/index.html.The bottom part of the case ia aprox 280*630*150mm, the lid aprox. 40mm heighGoing to be the home for this: http://www.gavle.to/~henrik.m/traktor.jpgI have two questions:1. The case feels a bit to high right now, should I try to lower the bottom part to get a more confortable working height ? 2. Any suggestions how to make the contacts for 230V~, midi in/out, possible line in connector etc ? I want the conectors to be protected during transportation, no risk for dust dirt etc. How to ? somekind of hatch ?Other thougts ?BestWise Quote Link to comment Share on other sites More sharing options...
arumblack Posted April 22, 2005 Report Share Posted April 22, 2005 You could put the connections on the front panel( up at the top out of the way). Quote Link to comment Share on other sites More sharing options...
Wise Posted April 22, 2005 Author Report Share Posted April 22, 2005 Ahh, good sugestion ! :)But how about the 230V~ ?/Wise Quote Link to comment Share on other sites More sharing options...
TL Posted April 22, 2005 Report Share Posted April 22, 2005 you could use a neutrik powercon on the top...http://www.neutrik.com/content/Products/products_group.asp?level2id=204_54471 Quote Link to comment Share on other sites More sharing options...
rogic Posted April 26, 2005 Report Share Posted April 26, 2005 why don't you buy one ready-made?http://www.illusiana.net/gallery/view_photo.php?set_albumName=Midibox-design-photos&id=DSC_0069 Quote Link to comment Share on other sites More sharing options...
Wise Posted April 28, 2005 Author Report Share Posted April 28, 2005 I have looked around for a ready-made-case, but with no luck finding one that will fit my panel. And I don't want to redesign the panel. And well.. Is it DIY it is DIYÂ ;)Still have'nt found a good sollution for the power connector. Thx Tl for the neutrik powercon, good, but not perfect. To big and uggly to stick up from the panel i think../wise Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.