Jump to content

MIDIbox Plus Firmware V1.910 & PCB


TK.
 Share

Recommended Posts

Finally the redesigned MIDIbox Plus PCB and the appendant firmware can be downloaded from the "MIDIbox Plus->Design" page. For users who want to upgrade their existing box (it makes sense if you noticed performance problems with the integrated MIDI merger): just add an additional connection between Pin #23 of the PIC and the R/W input of your LCD and burn the new firmware into your PIC. People who don't use a display should upgrade, too - they don't have to take care about the hardware mod.

Best Regards, Thorsten.

P.S.: Mike will sell this PCB for just 6 Euros in the next days :-)

Link to comment
Share on other sites

  • 3 weeks later...

Hi Matteo,

since your MIDI In is working, you don't need to exchange the CNY17-II by a 6N138. Only the additional line to the LCD is required. And the new firmware of course. Maybe you will notice a better performance with your breath controller, since LCD accesses don't slow down the ADC driver anymore.

Best Regards, Thorsten.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
×
  • Create New...