andrea Posted September 1, 2006 Report Posted September 1, 2006 Hi, I am planning to build a simple controller tha sends program change message when you push a button. I think that the old foorboard project suit perfectly my need.It would be great if someone would show me where I can find the PCB.Meanwhile I was wandering that I can build a simple midibox64, connecting only few push button and few pot( for example 32 button and 32 put) In this case I have a question:can I load the complete midibox64_v2.4 in the pic or I have to program a new application.Thank you very much for you kind attention.By Quote
MTE Posted September 1, 2006 Report Posted September 1, 2006 Hisome time ago i builded some Floorboard Layouts and a PCB....on the attachments u see the V2Download Layouts :http://www.midibox.org/users/mte/Floorboard-V1.ziphttp://www.midibox.org/users/mte/Floorboard-V2.zipEnjoyMTEDSC00029.JPG Quote
MTE Posted September 1, 2006 Report Posted September 1, 2006 Here a pic of the PCBs;)DSC00021.JPG Quote
andrea Posted September 1, 2006 Author Report Posted September 1, 2006 Thank you for your great reply!!I am glad to find someone that could help me to build this project;I am new in electronic and PIC world ; :)Just another question: which programmed did you use to flash the PIC?Thank you again Quote
MTE Posted September 1, 2006 Report Posted September 1, 2006 I use the JDM with the program "WinPIC"...cause "IC-Prog" makes too many failures on programming my 16F877... Quote
andrea Posted September 1, 2006 Author Report Posted September 1, 2006 Thank you MTE!I have PIC16F877-20/P and I red in this forum that it can be used for this project in place of PIC16F874.Do I have to change something in the firmware or I can load floorboard_v1001.hex file without any change?I'm sorry for these stupid question but I'm new! Quote
MTE Posted September 2, 2006 Report Posted September 2, 2006 Prot a noblem :)yoh just load this .hex into the 16F877 and enjoy :DRegardsMTE Quote
sambo Posted September 2, 2006 Report Posted September 2, 2006 What program do you use to open those floorboard pcb designs? I'm using Protel 99 and it doesnt like em!S Quote
MTE Posted September 2, 2006 Report Posted September 2, 2006 Eagle -> http://www.lumatron.ch/download.htm Quote
TK. Posted September 3, 2006 Report Posted September 3, 2006 MTE: can you please bring this into the Wiki? Then I will refer to it from the floorboard pageBest Regards, Thorsten. Quote
MTE Posted September 3, 2006 Report Posted September 3, 2006 Done :)http://www.midibox.org/dokuwiki/doku.php?id=floorboard Quote
TK. Posted September 4, 2006 Report Posted September 4, 2006 Thank you, I've added a link to the floorboard page! :)Best Regards, Thorsten. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.