Jump to content

Midibox TC encoder sending too large a step value


Recommended Posts

Posted

Hi all,

I have built a TC control box which is all working fine except when pressing menu I noice I can not see the first 4 programs, it goes demo bank thru to program 5 in one step. Also all values are going up in steps of 5 at a time. Im guessing its probably the encoder settings in the application?

Can anyone tell me if this may be correct and how to change it to a smaller value. The encoer is the one from smash's shop.

I tried editing the mios_tables.inc file and changed

MIOS_ENC_PIN_TABLE

;; encoders 1-16

;;        SR  Pin  Mode

ENC_ENTRY  1,  0,  MIOS_ENC_MODE_NON_DETENTED ; detented encoder at pin 0 and 1 of SR 1

to

MIOS_ENC_PIN_TABLE

;; encoders 1-16

;;        SR  Pin  Mode

ENC_ENTRY  1,  0,  MIOS_ENC_MODE_DETENTED ; detented encoder at pin 0 and 1 of SR 1

which helped a bit, but it is still almost impossible to make a certain number come up for a bank number. It is a bit better than it was tho.

Thanks!

John

Posted

Hiya TK,

That was the first thing I tried as you suggested it for my sequencer which has the same encoders, but when I added the 2 on the end I got a complie error in the assembler. When I removed the 2 on the end it compiled fine.

All the best,

John

Posted

Hi John,

it's an older application which was published at a time where the DETENTED2 mode was not implemented.

Just copy a mios.h file from a newer application (or from the migration/ path of the MIOS package) into the MIDIbox TC folder, thereafter it should work

Best Regards, Thorsten.

Posted

Thanks TK,  I will do that tonight.

Are many people making this project? I have to say it is awesome and totally worth doing!

All the best,

John

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...