Important note about DIN bug in MIOS V1.9c and MIOS V1.9d

[TK.]

Hi,

I just found a very ugly bug in the overworked debounce handler, which exists since MIOS V1.9c - after a "call USER_SR_Service_Finish" I forgot to change the register bank before checking a variable which is realted to debouncing.

It can happen - depending on the code within USER_SR_Service_Finish", that changes on digital inputs will be ignored.

I think it could be useful to inform you before you are starting endless troubleshooting. A new MIOS version will be released soon.

I did some quick checks in following applications:

 
• MIDIbox SEQ V3 (where I found it): DINs disabled if more than 8 keys are played on a MIDI keyboard (note stack overrides debounce counter)
   
• MIDIbox SEQ V2: not affected (no BSR change)
   
• MIDIbox SID V1: not affected (no BSR change)
   
• MIDIbox SID V2: not affected (no BSR change)
   
• MIDIbox FM: not affected (no BSR change)
   
• MIDIbox64/64E: not affected (no BSR change)
   
• MIDIO128: bug disables debouncing, no other effect
   
• MIDIbox LC: not affected (no BSR change)
   
• MIDIbox CV: not affected (no BSR change)
   
• your own applications: please check if USER_SR_Service_Finish is used. Workaround: add "SET_BSR 0x500" before return
  

Best Regards, Thorsten.