Differences

This shows you the differences between two versions of the page.

--- dipcoref4 [2020/05/22 10:22] – [Bootloader Flashing] antichambre
+++ dipcoref4 [2020/12/28 07:39] (current) – [Download] antichambre
@@ Line 28: / Line 28: @@
 \\
 ===== Download =====
-dipCoreF4 eagle lib for easy integration in your design. <wrap download>
+DipCoreF4 eagle lib for easy integration in your design.\\
-{{ :antichambre:dipcoref4_v2a.zip |}}
+  * <wrap download>{{ :antichambre:dipcoref4_v2c-eagle.zip |}}</wrap>
-</wrap>
+  * <wrap download>{{ :antichambre:dipcoref4-v2c-kicad.zip |}}</wrap> Thx to Phatline.
 ----
@@ Line 68: / Line 68: @@
 ^Connnector^^^^^^^^^
 |1    |mini-USB |THT  |USB             |[[https://www.mouser.fr/ProductDetail/TE-Connectivity/1734510-1?qs=sGAEpiMZZMulM8LPOQ%252byk5iMqoToDEs%2fWOccw2Kf2Ys%3d|571-1734510-1]]         |      |     |no!|for other ref take care about restricted area! |
+\\
-----
+\\
+===== Installing the MIOS32 Bootloader =====
-[[http://example.com|External Link]]
-===== Bootloader Flashing =====
 All dedicated MIDIBox Cores, must have pre-programmed bootloader in order to communicate in MIDI with [[http://ucapps.de/mios_studio.html|MIOS-Studio ]]\\
 Like the Waveshare, the dipCoreF4 has no programmer onboard.\\
 \\
-Even if the dipCoreF4 is now provided with it, should be necessary to explain connection and process.\\
+Even if the dipCoreF4 is now provided with it, better to explain connection and process.\\
 \\
 You will need:\\
   * A ST-LINK/V2 SWD interface, [[https://www.st.com/en/development-tools/st-link-v2.html|dedicated programmer/debugger]] or any equipped Discovery/Nucleus board.
   * The [[https://www.st.com/content/st_com/en/products/development-tools/software-development-tools/stm32-software-development-tools/stm32-programmers/stsw-link004.html|ST-Link Software]].
-  * {{:antichambre:dipcoref4_bootlader.zip|Bootloader hex file for dipCoreF4}}
+  * <wrap round download 60%>{{:antichambre:dipcoref4_bootlader.zip|Bootloader hex file for dipCoreF4}}</wrap>
   * 5 Grabber clips or an home-made adapter board.
 {{:antichambre:grabbers.png?400|}}{{:antichambre:swd_adapter.png?400|}}\\
@@ Line 98: / Line 96: @@
 \\
-Once the dipCoreF4 is correctly connected refer to [[http://ucapps.de/mbhp_core_stm32f4.html|uCapps STM32F4 Based Core page > Installing the MIOS32 Bootloader ]] where the flashing process is already well explained.
+Once the dipCoreF4 is correctly connected refer to [[http://ucapps.de/mbhp_core_stm32f4.html|uCapps STM32F4 Based Core page > Installing the MIOS32 Bootloader ]] where the flashing process is already well explained.\\
+<wrap round download 60%>{{:antichambre:dipcoref4_bootlader.zip|please use dedicated bootloader hex file}}</wrap>
+\\
+----
+\\
 ===== 407VG vs 405RG =====