i need to make a little controller similar to the presonus faderport.
all it needs is the lcd, the mtc 7 segment time code display and then 5 buttons for the transport, rew, ff, stop, play & record.
also a single fader.
so as i understand i would go about it this way.
using J5 on the core i put a single fader to Vs/Vd/A0 and then i attatch the 5 buttons to A1-A6 grounding the last pin or diabling it in the asm file.
question: how do i intergrate the mtc.ic file into the mb64 s