Building the MB-6582 Control Surface

Hola, the MBSID is such a great project, that i wanted to contribute and share insights of how to build the control surface. I think that names, part-numbers and supplier links of used components and photos taken of every relevant construction step will be a nice reference for you. Be warned, this construction guide will be for frontpanels with drilled holes in the four corners. It should be adjustable for frontpanels without corner holes, but I will not cover this. The chosen

Step 21: Installing a studio-compliant 6.3mm stereo socket (passive mixer) Parts Used: * GÃ¶ldo J002G 1/4 inch/6.3mm gold stereo socket (Thomann audio store, for example) * A length of wire and heat shrink tube * A 12mm drill, a countersinking cutter will do nicely ("Senkbohrer" in german) * A roll of electrical insulating tape * Your favourite soldering equipment Description: * First, extend the hole for the old 3.5mm socket to 12mm (photo 1 before modification and 2 after

Building the MB-6582 Control Surface - Photo Tutorial