mnmlcore

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
mnmlcore [2018/08/02 02:43] – [Features] phatlinemnmlcore [2021/01/17 01:30] (current) – [mnmlCore] phatline
Line 1: Line 1:
 ====== mnmlCore ====== ====== mnmlCore ======
 +**--at the moment obsolete-- because there is [[dipcoref4]]!!!**\\
 we want to create a small STM32F4 based Board (for example 10x4cm in size), with limited Pins/sockets...\\ we want to create a small STM32F4 based Board (for example 10x4cm in size), with limited Pins/sockets...\\
 [[FantomXR]] had made such a thing before, so we start with his working design, and invest some time in it\\ [[FantomXR]] had made such a thing before, so we start with his working design, and invest some time in it\\
-see also this article: [[http://midibox.org/forums/topic/20732-another-midibox-core/?page=1|Another Midibox Core]]+see also this article: [[http://midibox.org/forums/topic/20732-another-midibox-core/?page=1|Another Midibox Core]]\\ 
 +I have started a new Tread in the Forum, so we can discuss things there: [[http://http://midibox.org/forums/topic/20899-mnmlcore/|mnmlcore]], but i hope that most of the things will be done in the wiki, so it is more clear\\
  
 ===== Introduction ===== ===== Introduction =====
Line 10: Line 12:
 mnmlCore, miniCore32,  10x4CORE, RFcore, fundimentalCore,  basisCore, baseCore, XRcore, midicore mnmlCore, miniCore32,  10x4CORE, RFcore, fundimentalCore,  basisCore, baseCore, XRcore, midicore
  
 +====== Design Concepts ======
 +phatlines idea with onboard-split-cut MidiIO:
 +{{:phatline:desing-concept-midi-port.jpg?1000|}}\\
 +
 +====== PCB ======
 +=====the inital FantomXR Board:=====
 ==== Features ==== ==== Features ====
-the original [[FantomXR]] Board: 
 - **Size V0:** 98,5mm x 48,5mm \\ - **Size V0:** 98,5mm x 48,5mm \\
 - **Micro-SD-Slot**(flat @back on the board)\\ - **Micro-SD-Slot**(flat @back on the board)\\
Line 24: Line 31:
 - **SWD-Header** (to program BOOTLOADER into board by using for a example a Discovery-Board)\\ - **SWD-Header** (to program BOOTLOADER into board by using for a example a Discovery-Board)\\
 - **Reset-Header**\\ - **Reset-Header**\\
 +{{:phatline:FantomX-Core-V0-connectors.png?600|}}\\
  
-  +===== our modified Board:===== 
- +==== improvements ====
-====== PCB ======+
 [[FantomXR]] made some improvement in his other projects, so we also should change this things:\\ [[FantomXR]] made some improvement in his other projects, so we also should change this things:\\
 "For example I changed:\\ "For example I changed:\\
Line 37: Line 44:
 added an inductor behind the USB connector for EMC-improvements\\ added an inductor behind the USB connector for EMC-improvements\\
 " "
 +
 +===== PCB Fabrication/Pick and Place:====
 +[[FantomXR]] have a pick and place machine, price he not knows up to now FIXME\\
 +need to ask him about the size of a sheet FIXME of multiple pcbs his machine can hold FIXME\\
 +find cheap PCB-Manufactor, which do this sheets FIXME for cheap FIXME\\
  
 ====== Hardware Requirements ====== ====== Hardware Requirements ======
Line 42: Line 54:
   * Soldering Iron, Wires, PCB....\\   * Soldering Iron, Wires, PCB....\\
   * USB Power Supply   * USB Power Supply
- 
-====== Design Concepts ====== 
-phatlines idea with onboard-split-cut MidiIO: 
-{{:phatline:desing-concept-midi-port.jpg?1000|}}\\ 
  
 ===== Resources ===== ===== Resources =====
mnmlcore.1533177782.txt.gz · Last modified: 2018/08/02 02:43 by phatline