Leaderboard

We're just about ready for launch of the new SEQ v4+. This thread serves as a proper introduction, you can also ask questions on hardware etc. I first became aware of the SEQ around 2008. This was about the time of the migration point of V3 to V4 and the Wilba design. I finally got my hands on a Wilba front panel in 2012 and I was rocking the hardware soon after. Around the end of 2016 I felt there was room for improvement. a number of my TL1100 buttons were failing on my unit there was still no "standard" case available, also the rear panel was not well defined the PCB supply situation was (IMO) non-transparent and confusing for new users I had ideas about hardware changes What started as a simple question morphed into a multi-page idea thread. It was clear that the idea of incorporating a 16x4 matrix was not feasible from a software perspective, but it at least catalysed the idea towards a flexible "selection row" and other handy features. i liked the idea of mechanical keyswitches for their quality and very reasonable price. I then worked on a concept of illuminating these, finally settling on a misused superflux LED through a Matias switch. It became clear that a "complete solution" would require redesign of all of the boards, so I spent the winter of '16/'17 doing that. This entailed sourcing hardware items such as high-quality OLED displays, Matias switches and keycaps, a new Core breakout board etc. I periodically checked in with @TK. to confirm the right direction for the hardware (matrix routing and button features). Without saying, the SEQ platform is an incredible piece of work and TK. deserves a lot of credit and praise. From the start, I was in contact with @AdrianH about potential case designs. He has taken all board outlines and done the CAD work himself. I think you will find the case an excellent solution to cramming a lot of hardware inside while keeping the panels clean. Peter @Hawkeye is the co-partner of MIDIphy. He handles the business side and also webdev. Perhaps more importantly, he is a very enthusiastic builder and documenter of all the designs. Normally I will do a test version, but the product photos and demos are usually his. I have spent endless hours discussing and debating/reasoning with him and there is always a positive and fruitful outcome. Hats off to you! So: thanks for all of your interest so far. The aim is to provide you the best opportunity to build your very own SEQ. Andy --- Video Build Tutorials --- --- MIDIbox NG Downloads (for testing) --- SEQ_L.NGC fluxtest.ngr

I have wanted to do some building for people who find it a challenge and want to experience the power of Midibox. Where and how would I apply for such a position? I guess I’m making my formal application now, my area is Canada/North America. This new sequencer looks fabulous! A real work of art, kudos to Andy TK & Peter and anyone else involved.

Please find the current thread here: Thanks for all of the discussion! Andy

Yes, Peter requested a TPD-like addition. Still have to test and clear it with the case-master. SEQ V4+ will run also on a Wilba panel if the Core is STM32F4. The previous ideas thread had something like a v5 (e.g. RGB 16x4 matrix) but in the end it was mutually decided to make only subtle hardware changes to put less software support pressure on TK. There's a line driver DB-25 port, so all expansions are external. E.g. Altitude's AOUT, I will probably do one as well or remix my current design LEDs, same as on the Discovery but broken out on the front rear panel. One is acting as a Beat LED, three left for other functions (not assigned yet) Yep! And a stereo jack to boot, so one channel is defined to work as a 0-5V gate. We'll get going as soon as everything's ready :)

This is a really beautiful gear!!! This sequencer could have the same success as the Sequentix Cirklon. It would be great to have an official builder in each country to allow everyone to become a owner! Bravo les gars!!!