[sammichSID Bulk Order Run #29/#30 - preorder form online]

I'll take a kit, I have a few chips here

[Sammich Sid Revision 3]

I got it up and running, everything is loaded, and it sounds great.

   I can't tell if both sid chips are working, is there a way to test that?

 

 

H

[Sammich Sid Revision 3]

progress:

 

 

[Sammich Sid Revision 3]

you were right, the connectors on the right are for the backlight, K and A are for Cathode and Anode. once I figured that out I ran some wires. it's light up now. thanks again for your help.

  now to figure out the rest....

 

 

Howard

[Sammich Sid Revision 3]

Well,

  I soldered in the display just using the misaligned pins on the left side, and I am getting no backlight, I tried 5v and 12v.  

 

Howard

[Sammich Sid Revision 3]

One more quietestion,

  what do I set the jumper to for the backlite voltage?

 

howard

[Sammich Sid Revision 3]

Thanks Ladigid On,

  I'll give it a shot, thanks again for your help

 

 

Howard

[Sammich Sid Revision 3]

I am still a little unsure on how to re route the power for the display

[Sammich Sid Revision 3]

Thanks for the replies,

  here are some more pics,  al this said, should I have a different display?

 

thanks

 

 

Howard

[Sammich Sid Revision 3]

honestly, I don't know. It's the display that came with the kit

[Sammich Sid Revision 3]

HI,

  I have had this sammichSID kit laying here, today I am putting it together. I have the Revision 3 board, everything is going well, but, I am at the stage where I line up the pins from the bottom board to the top/display board, the bottom header has 18 holes, the header in the display has 16 holes