-
Posts
10 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Gallery
Posts posted by Majo
-
-
:-[ :-[ :-[ :-[ :-[ :-[ :-[ :-[ :-[ :-[ :-[ :-[ :-[ :-[ :-[ :-[
OK ! I've been too fast !!
I' forgot to configure MIDIOX before flashing!
:-[ :-[ :-[ :-[ :-[ :-[ :-[ :-[ :-[ :-[ :-[ :-[ :-[ :-[ :-[ :-[
No Problem at all!
MIOS V1.7 OK!
MIDIBOXSID V1.6 OK!
Bankstick OK!
;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D
Thanks to everyone !!!
-
???
After flashing the Application MidiBoxSid v1.6
(setup_8580_with_cs.syx)
System restart and give me :
001 (I believe is an error code:
0x01 | Less bytes than expected have been received) ???
NO PROBLEM Flashing the same file under MIOS 1.6!
:'( :'( :'( :'( :'( :'( :'( :'( :'( :'( :'( :'( :'( :'( :'( :'( :'( :'( :'(
Thanks to everyone !
-
MIOS V1.7
© 2004 T.Klose
READY.
;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D
Thanks Doc !
(I forgot to flash it during the first 2 seconds !!) :P
-
Here I am!
I'll be happy to try your New MIOS 1.7 on my system Thorsten! :D
Just a thing :
Under download section of MIOS there is a package named 1.7, but if I flash it , the name at Boot is always MIOS 1.6 2003 .......(I thinked you forgot to update the
notice .....but after I change Bankstik pin to #28 the System does not access the 24lc256 any more.....it is still working at pin #22)
Please send me an update version or say me what's wrong? ;)
Thanks ;D
-
:D :D :D :D :D :D :D :D :D :D
hello again!!
thanks for your quick and detailed reply!!!
Sorry for my pressure....
I've just built the instrument and I'm exploring all its capabilities so forgive my enthusiasm..... :-[
I'm asking you about my doubt to understand more about....
I'm an achitect (with passions for music and electronic..)
so forgive some stupid question......
I underestimate the Link button, in fact it is very important (I'm a Cubase, Nuendo user but I haven't joined It to my system for now!)...
For the modulation matrix you probably misunderstood me (sorry for my english..),It is perfect as it is.... ;D
The whole architecture is original and fantastic!! :-*
I refer only to VMA section.... :-X
(ES. the other byte could be a second VCC assignment that make possible to control filter and volume or Attak... Just this ....) :-X
Take all time you need !!!(I don't know as you can menage all your application and fans together!)
Why a short circuit ?
C5 condenser at the output of the sid board doesn't provide for isolation?(I ask you only to understand better ...) ???
All MY GRATITUDE!!!
;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D
-
:o :o :o :o :o :o :o :o :o :o :o :o :o :o :o :o :o :o :o
AAAAAAAAAAAARRRRRRRRGGGHHHHHH!!
I tryed to save a patch with VCC more than 1 and all system crash!!!!!!,
I needed to flash again MIOS 1.6 and Midibox Sid Application to restore full functionality!!(only on the master PIC).
If the problem is a bad message from my master, seems
to be useful implement in the config menu a software switch that prevents from accidental upload ......... :P
Another two ideas:
1) I will found very useful to assign Modulation parameters from Velocity, Aftertouch, Wheel etc..not only to a single CC but as for the Modulation Matrix to several ones with different Depths, so it is possible create much more expressive sounds..... ;D
2) I'v dreemed a Midibox LaserHarp .... (my next project )8)
Thanks Again!!
(I'm curious to know more about you, is there a your Photo? what's your age ? Your works?)...
-
:-X :-X :-X :-X :-X :-X :-X :-X :-X :-X :-X :-X :-X :-X :-X
OOOOOOOOOOOPS!!!!!!!
the problem brings out only when the system is connected to my masterkeyboard :-[
I'm investigating to know what message is faulty!
probably is a control change message that interfere with
the integrated midi merger ???
I'm exploring the capability of my new fantastic intrument, early I will be happy to share my patches with the comunity....... :)
(this is one of the most exciting site I know)
;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D
-
:'( :'( :'( :'( :'( :'( :'( :'( :'( :'( :'( :'( :'( :'( :'( :'( :'( :'( :'(
Hello Thorsten!!!
Sorry to tell you a bug report in your 1.6 Sid application,
If VCC (Velocity Control Change ) value is more than 1 my system crashes and reboot......
I'v forgotten to say I uses the 8580 release and MIOS 1.6.....
:( :( :( :( :( :( :( :( :( :( :( :( :( :( :( :( :( :( :( :( :( :( :(
What you think about implement in a future release this ideas ?:
1) Is possible to use the link Button (I found it useless or you you can introduce a blinking mode....) to enable a kind of Superpolyphonic mode that uses a single patch with 4 voices of polyphony , so that you can play four voices chords on the same midi channel without using ..... ::)
2) Create a kind of Superpatches that configure all Sids with their midi channel, single tone , Layer, Split, sequences, etc...,
using for example bankstick 0 for the Superpatches and
other banks for keeping tone patches keeping compatibility with current ones... 8)
Just another question :
What if I join the four outputs from the sids module without the 10K resistor ???
I should have only a lowest output ... ???
Why you suggest to use it?
thanks for your patience ;)
PS.. I'm waiting to find better knobs to send you photos for the gallery ....
-
;D Hello Thorsten I did IT!!!
A complete MidiboxSid with complete cs step3 and four sid engines in a week..!!! :o
I made some little changes from your design to simplify
something, but all sound GREAT!!!
My system now is stable and perform 4 18F cores with MIOS 1.6 and midiboxsid 1.6 ...
If someone could be interested I made a new frontpanel in coreldraw, a new power module, and I made different layout to help me build it quickly!!(using prototype boards), If you like I can send you fotos and frontpanel file, (sorry I have no layout files because I draw it directly with transfers on the copper..) :P
I also have several pic16F that I buyed several time ago
when you begin your project....(I follow you from the beginning of the sid project but have no time for build...)
I would like to use the 16F for the slaves (I have 10....and more) I know that it need a great effort to create a 16F application 1.6 compatible but if you want I can try to help you if you have no time for it.(I know some about it..but i will need your supervision...)
Thanks for all !! !! !! !! !! !! !! !! !! !! !! !! !! !! !! !!!!!!!!!!!!
New board(s)
in Design Concepts
Posted
;D Happy to know that someone finally dit it !!!
THANKS TO SMASHTV!!!!
but First of all THANKS TO TORSTEN AND EVERYONE WHO CONTRIBUTE TO THIS WONDERFUL PROJECT.