[MIDIbox CV V2 Concept]

Hi

 

sneakthief thank you very much for the hex it is working as far as I could try it !

 

Moreover ilmenator's SCS (connected to j8/j9) is modifying some values on the lcd ...

 

Vielen dank

 

Grusse aus Frankreich

[MIDIbox CV V2 Concept]

Ok thank you for your answers

And sorry for my poor english

 

Best

 

Michel

[MIDIbox CV V2 Concept]

I didn't missed it but as this particular "SCS" is connecting to J8/J9 .

 

I was just wondering if it could cause a conflict with two LRE8x2.

 

Best

 

Michel

[MIDIbox CV V2 Concept]

MIOS Terminal seems to report everything is OK (apart from the SD Card issue).

Yes I tried J15A and J15B without any differences.

 

Also I was expecting to use ilmenator's SCS but it connects to J8/9.

Is it possible to get it work with two LRE8X2 ( TK ? )

 

Best

 

Michel

   

[MIDIbox CV V2 Concept]

Hi

 

I just tried Sneakthief's hex but the lcd displays a first line full of blocks nothing else.

 

Here is the MIOS Studio outpout : SD Card not found

 

I tried the Seq V4 on my core and everything worked as it should...

 

any ideas ?

 

Michel

[MIDIbox CV V2 Concept]

sneakthief

 

Thank you very much for the hex file !!

 

I'll try it

 

By the way how many LRE8X2 are supported ? One (website) or Two (as stated in the config file)

 

Best

[MIDIbox CV V2 Concept]

Hi

 

Could somebody be nice enough to compile an uploadable hex or bin file for my newly built stm32f4 core ?

I would like to do some UI testing with SCS and 24X2 LCD

 

TIA

[SID V2 - chute de tension après BR1.]

Salut,

 

Un peu tard comme réponse ...

branche le 5V sur J2, supprime et shunte le 7805.

 

A plus

 

Michel

[STM32 Core and AOUT_NG (SEQv4)]

Hi

 

Please check connection between sc on j19 and the IC pin pb6.

On my core IC pin pb6 is connected to the SIL resistor network as it should but there is no connection between the resistor network and J19 ...

 

Could someone confirm the missing track or do I have a faulty board ?

[[S] TPD (Track Position Display) 5 semi kits for sale]

Hi

I'm in for one semi kit

Regards

[[S] x0xb0x, MBFM built modules, PIC & SID boards, Waldorf Knobs]

Hi Rosch !

I'm interested in all the tr9090 if they are still available ...

Regards

[MIDIbox SEQ V4Lite]

Hi,

Is it possible to set the note duration (gate length) in step recording mode ?

Regards

[BPM encoder and display for v4l?]

Hi all,

Some few questions :

Is it possible to wire the encoder directly to J10 in order to save a DIN module ?

Does it make sense to use 3 leds digits for the step display as the v4l has 64 steps ?

Regards

[Adaption of Waldorf Nano]

Hi,

Just to confirm the ASX only needs power and a MIDI In socket to work . optocoupler is on-board .

I tried today it's working like a charm .

Regards

[Feedback potentiometers]

Hi,

Sorry I think I misexplained myself :

I was thinking about digital potentiometer (IC) that are controlled by the software.

The IC replaces the mechanical potentiometer and is controlled by rotary encoder.

So the feedback value would be stored into the patch structure.

Regards

MikePig

[Feedback potentiometers]

Hi,

I'm about to start the frontpanel design for a 19 inches rack version of MB6582 and was wondering the following :

Is it any space left in patch structure and DOUT left to use digital potentiometers so that feedback could be driven by the frontpanel encoders and their values could be saved in the patch structure ?

MikePig

[megadrive YM2612 fm chip]

Hi all

Could the following link be helpful ?

http://www.smspower.org/maxim/docs/ym2612/index.html

IMHO I think this chip can output amazing sounds and with a midiboxsid this could be an ass kickin' team.

Bye

[Photos de ma MIDIbox ( enfin finie :P )]

Salut !

Pour des materiaux sympas style résines, silicones vous pouvez essayer

les magasins de materiel dentaire.

Ya vraiment tout ce qu'il faut : silicone de couleur pour faire des

boutons style soft touch , des resines translucides ou

opaques, materiaux de moulage, ....

En plus généralement ca durcit en moins de dix minutes

Voila c tout !

A+

[Photos de ma MIDIbox ( enfin finie :P )]

Salut !

Pour des materiaux sympas style résines, silicones vous pouvez essayer

les magasins de materiel dentaire.

Ya vraiment tout ce qu'il faut : silicone de couleur pour faire des

boutons style soft touch , des resines translucides ou

opaques, materiaux de moulage, ....

En plus généralement ca durcit en moins de dix minutes

Voila c tout !

A+

[Cant get 18F452 working...]

Hi

Thank you for your help ! I thought I just have to burn the pic with the.hex files to get it working ( just like the old non-Mios apps).

My SID is now playing notes !

Now you can vote for THE LAMER OF THE YEAR !!!! (MikePig without a doubt)

Thanks

[Cant get 18F452 working...]

Hi

I have a core module with a 16x4 lcd on it. I have tried to program the 18F452 with various firmwares (midimon, midisid, midi box64) but the PIC don't boot and the lcd stay with 2 black lines.

I have checked the voltages of my jdm programmer, all seems to be ok... I can even burn my old 16F877 (with the last mb64 firmware) and they worked with my core module and my lcd (even underclocked since I have a 10 Mhz crystal on the core).

ICProg report the 18F452 as succesfully verified and I can read the firmware and compare it with the source firmware all is OK but when I plug the PIC and the core, the display stay black.

What is this strange behaviour have anyone an idea ?

P.S.: I have put the resistor between pin31 and Pin 38, I have tried with external power supply on the jdm, it doesn't change anything. I have tried with WinXP, Win98 with two different computers.