Christ

Ok , that I didn't know , but when I do an VERIFY I got an error message on adres 300000 " Value in image is 0xFF ; value in target is 0x00" :-\ Did I screw the pic? I think I'll better make MBHP-burner , Thorsten , I'll hope your an patient one ;)

Thanks Thorsten, I was able to patch the file , but now is going crazier: If I compare your hex file , with the one I uploaded from the pic is everything the same besides: YOUR HEX FILE 200000 00 00 00 00 00 00 01 00 300000 FF FE FF FF FF FF FB FF FF FF FF FF FF FF MY HEX UPLOAD (FROM THE 18F452) NO ADRES 200000 300000 00 26 0F 00 01 81 00 0F C0 0F E0 0F 40 Al the rest is the same Do I have a wiring prob, or what?

Hi , It's my first post over here and first of all thanks for this great site; Now my problem : I'm gonna build an midibox64 for control TRAKTOR-software throught the RS232-port. So for the bootloader I have to change the ID device in ID = 0000000000000100. Correct me if I'm wrong. But I can't use ICprog , because my pic programmer (WISP628) doesn't work with this program. I use BUMBLEBEE and in the hex-file I have to change the next rule : 200000 00 00 00 00 00 00 00 00 to 200000 00 00 00 00 00 00 01 00 (I thaught this was the correct adres an ID-setting) And that I can't , So can someone send me a new hex of the bootloader with the right ID , or give me another suggestion? Thank CHRISTOPH

Hey , I'm new here and will try to use the MIDIbox64 for an midicontroller for the TRAKTOR DJ- software. With the very good explanation on this site , I think I will make it work. ;) ;) But I do have a few questions : 1/ Can you use 2 displays ( Player A-B) ? 2/ Are encoders usable for FF or FR in a song ? 3/ Does anyone know were you can find a big Cap for a JOG-wheel Thanks