Ryujin

Now it's working fine. Still i think there's an Lcd bad connection like you said. The core is working fine but i can only see the upper line in my 16x2 LCD, the botom line is clear..

That's all i know.. btw, if i request a SysEx Dump shouldn't it be one exact copy of main.syx?

Sorry for the lack of information. I uploaded Mios and MidiBox64 with success. I've got all checksums OK. After that the Lcd gone crazy displaying random messages, then i re-upload the aplication and now i have no lcd at all, just backlight.

When uploading MIOS again I don't get any feedback. In the in port monitor i can see only the upload request after the hex upload

All pots are fine, it doesn't reboot unless i conect a LCD. And i only get one uploadRequest. In Mios Studio i start to upload MidiBox64 but in never gets feedback from core.

Hi! Well.. My MidiBox64 was running perfect some hours ago.. But i don't know why but it started to malfunctioning. It started to send a SysEx every 2 seconds.. So i uploaded Mios again and now I get this message : F0 00 00 7E 40 00 01 F7 I think it's the aplication request.. but i can't upload Midibox64 anymore.. Plus, when i connect an LCD it reboot every 2 seconds.. What's wrong?

All right!! it's working now.. wel.. Almost.. I still get a chorus depth random message.. i think it's a bad soldering. Thanks

I'n not sure about that but in Midi-ox i get messages from CC: Volume and CC:brightness... Any clue?

Yes.. I have all conections connected, to the pots and the remaining to ground.. Still i have random messages

Hi everyone. I've got stuck in this problem building a midibox64.. So, i've burned the Mios and the Midibox64 but when soldering every Pot to the Ain module i still got lots of random mesages coming from it. I checked every conection and still don't know where is the problem. btw.. do i need to modify the main.asm number of Pots conected? I'm using only 21 pots in a single Ain module.. Please help ???

I've been reading some posts and i didn't understant so far, if is it possible to have only 2 encoders, (without the led rings ) and the 64 analogue pots in the MIDIbox64. Please some help..