Janne

;D Ahh, i fixed it ;D Tnx you all for your help

huu there you lost me completly, where in that file shall i change. I dont know anything about programing :-\

D4 and D7 was switched :) So now this problem is solved, then then next one shows up :-[ My alps rotary button is dubble jumping when i turn em

Hi Well its changes some part on the display, but it is the same "crap" that are showning. All the buttons and rotarys are working, its just the first display thats not working correct.

Well i solved it, but there is something else inseed. When i uploaded setup_mbseq_v2.hex and reboot the SEQ the first display is just showing NOIX IX NOIX NOIX NOIX NOIX NOIX and the second one is working fine. I use two GTC40021 displays, and yes its set to two 2*40. Any ide here?

Hi there I have built a MIDIbox SEQ, same as TK´s. But i toke the fast way and got my core from SmashTV's Website with all components and with a PIC and bootloader preprogrammed (PIC ID header: 0000000000000000). When i start up MIOS Studio all is working just fine, i get a heart beat form the core (timestamp 1580077000 us: sysex message: F0 00 00 7E 40 00 01 F7) and its ticking ever 2 sec. I upload setup_mbseq_v2.HEX and hits the start button and away it goes without any errors and its tell me in the ends that it is complet. (all checksums are ok). When i restart SEQ the display is empty :( I have seen on the older core that J3 has to be strapped, but this core card doesent have a J3. Im i missing something here or im i just plain dumb??