neilneil

I have an AIN module, i hooked it up and now the PIC doesnt appear to even send a startup message! Have i just killed my PIC? If i get this fixed i will then try and upload the app through MIOS studio. Thank you Justin for pointing that one out! (about virtual 64) Thanks Neil

Yeah, ive tried 3 different ones. I went over the circuit resoldering some parts and took out the pot, then put it back on and resoldered the connections between ground for all the unused pins, now i dont get any message when i turn the pot! i have no idea whats happening. When you upload the application from the MIDIbox 64 editor should it confirm that the application has been succesfully loaded? Thanks again!!!

Thank you very much for replying!!! i have deffinately got one side connected to 5v the other to Vs and the middle terminal to A0 on the CORE module. Ive tried a couple of pots. And i dont have an AIN connected. The unused pins of J5a on the CORE are connected to the Vs on J5a and unused on J5b are connected to Vs on J5b Sorry if im doing something really stupid here.

Hi, i built a CORE board made by smashTV (thank you very much Smash!) ive added a single pot (10k linear) to it and i get no output from half of the turn of the pot and seemingly random MIDI messages from the other half, could i have missed something out in the MIOS upload or the MIDIbox 64 editor? All unused pins i have grounded (i think) I REALLY am sorry if this has been covered elsewhere, i couldnt find an answer. Point me in the right direction and tell me to look better before asking if you dont have time to answer. Cheers Neil