dott.benway
-
Posts
6 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Gallery
Posts posted by dott.benway
-
-
Hi all,
I'm trying to resurrect a old MIDIBOX SID that I have built for an eurorack modular synth project.
My setup is composed by the following:
1 16x2 LCD display GDM1602B Xiamen ocular
1 mbhp core made by smashTV running PIC18F452 BSL V1.2B MIOS V1.9E
1 SID board made by smashTV , 8580 is installed
the application is setup_8580_without_cs.hex
In past the system was working perfectly but the cable connections where unstable, so I have decided to rewire It.
After the rewiring I have double checked all the connections but the system doesn't work anymore.
I have also checked all the voltages .
the synthoms are the following:
1) the display is blank (no messages, only a solid rectangle at the system boot)
2) after the system boot the SID is generating a loop of 4 notes like an "alarm tone"
3) Sending a Query in MIOS studio stops the "alarm tone" with the following message:
Operating System: MIOS8
Board: MBHP_CORE or similar
Core Family: PIC18F
Application is up & running4) Sending notes in MIOS studio results only in audible "CLICKS"
Have you any suggestions about?Any hint would be very appreciated.
Thanks,
B.R.
Giorgio.
-
Hi Mr. Sebo!
what's the name of the Chip broken?
I buy for 40 euro a M110 @ this page : http://www.vintagechip.altervista.org/
Maybe u can find your chip .
(...)
Do u need a black box like this?
_____
>-- V/oct ---| |
| VCO | ----> /\/\/\/\ (square wave)
|_____|
Try this simple schematic:
http://www.uni-bonn.de/~uzs159/vco4069.html
(...)
A very very good analog keyboard interface project is this :
http://www.musicfromouterspace.com/analogsynth/AAA_VControllerIndex.html
http://www.musicfromouterspace.com/analogsynth/matrix_keyboard_may2004/matrix_keyboard_may2004.html
Maybe this can be a great T.O.S. substitute
(T.O.S. mean Top Octave Synthesizer or what?!? )
Soon the pictures of The "re-animation" of my Siel mono !!!
;-)
-
Hi,
http://experimentalistsanonymous.com/diy/Schematics/Circuit%20Bending%20and%20Modifications/
Here is a good tutorial about the speak & "hacking" spell!
( nothing about midification, but funny!!! )
-
I think 3 way to resume the dead m110 :
1) I buy a new m110 chip.
I have found it on e-bay for 40 €.I'ts very expensive, cause I take the sinth from a friend 5 years ago for 10 € !!!
but this mean no midi, or build another midi interface pic based ...
http://www.electronic-obsession.se/studio/mono/mono.html
http://www.electronic-obsession.se/studio/mono/mono_mtc64.JPG
http://www.electronic-obsession.se/studio/mono/mono_vco.JPG
2) build the atmel board.
Mmm ... long story. I need to build a specific programmer,install another sofware (...)
@ this time I'm building 2 core modules + the pic burner: another project Atmel based sound like "no-sense"!
3) A core module based project.
This can be a great alternative:with a cv/gate out, I can control the synth via midi,but in this case
the keyboard of the synth not work!
but ... if I add an input (like a din module ? ), I can connect the matrix of the keyboard and ... GOAL!!! :-)
Maybe i'ts like kill a fly with a cannon ball,but I think this is a good start point about a midify-discussion.
... and many peole are "luky" m110 owner! ;-)
-
hi people!
4 Years ago I try to midify a Siel mono, an analog sinth made in italy in 1980
but in a wrong operation, I burn the main chip , a pretty rare and expensive "m110". :-((
This is a 40 pin ic product by SGS in early 80, and it's used in many
vintage sinth like Siel mono,cruise, or Jen SX1000.
http://www.milton.arachsys.com/nj71/pdf/m110.pdf
This chip scan the matrix of keyboard and a dco (clocked by 1 mhz I think) make the
square wave output for the note.
The m110 is very hard to find and much expensive, so i think about a project (pic based) to make a clone.
In the net I have found this board but the core is an Atmel ATMEGA8L (!!!)
http://www.milton.arachsys.com/nj71/index.php?menu=2&submenu=4&subsubmenu=1
(look "3.5 Keyboard" section!)
At this time i'm building a 1 rack unit MIDIbox SID Synthesizer (soon the pics ...), and I ask me
if is possible a project mios based like a replacement module of the dead m110.
Any Idea?!?
No display and weird sounds from MIDIBOX SID v1
in MIDIbox SID
Posted
Hi All,
a little update.
I have removed a short circuit in the display connector.
Now the weird alarm sound is gone and the SID module is up and running.
Unfortunately the LCD display doesn't work. Maybe I have damaged a GPIO of the PIC.
B.R.
Giorgio.