LaRssA
-
Posts
53 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Gallery
Posts posted by LaRssA
-
-
nope - still available if anyone's interested :)
-
Hi there!
Since I haven't got the time to play around with it, and it has been sitting there pretty much unused since I built it,
I want someone else to enjoy this fabolous thing! :smile:
So:
100% complete MB-6582 (see attached pictures for colors) including 8x6582 chips (new old-stock) which is already in the unit.
I also have an original C64 PSU which can be included if the buyer wants it - please note that this is the 230V european version!
This is the result of the first batch-orders of PCB's and panels.
I've put a lot of time into building and gathering the parts for this thing, so asking price is 6500 NOK (PayPal prefferable) incl. worldwide shipping.
Unit is working 100% without any noticable problems, but is sold as is, and are located in Oslo, Norway if there are any locals...
Let me know if you have any questions!
Lars
-
Since this has been laying around for quite some time..
New price!
4000,- NOK + shipping (330,- in Europe, 570,- international)
All the info is in a previous post.
Reply here or send me a pm if you are interested. :)
-
...and that's it!
I'm all out now.
-
Hi everyone!
I still have these left:
2x 6581R3
NOK 100,- a piece + shipping
(I'd like to sell them as a pair...)
Lars
-
Cutter - sorry the 6581R4AR's are already sold...
rosh - I'm asking 100 NOK a piece + shipping.
This is what I have left:
2x 6581R3
6x 6581
-
Hi!
I have som spare SID's that I don't need:
5x 8580R5
1x 8580R5B
2x 6581R4AR
2x 6581R3
6x 6581
I live in Oslo, Norway, but will ship internationally.
It's been a while since they were tested, but everything were OK then,
and they have been kept in tubes in room-temperature since.
They are sold as is.
Please reply to thread with bids in NOK (no USD/EUR/GBP bids). All bids are + shipping (not that expensive).
I preffer PayPal, and will ship fast.
-
Hi!
Just wanted to let everyone know that this is still available...
All the info is in a previous post.
PM or write here if you have any questions! :)
Lars
-
Ooooh another Norwegian midiboxer! Can I ask where u are located? It would be too bad if there were others than me in the area owning a sid synth hehehe... Nah, what I meant to say is that it would be bad having midiboxers around the door and not knowing hehe. But then again, Norway are a long stretched country...
Sorry, totally off topic... Hehe
Hey technobreath - I'm located in Oslo, so it's not next door ;)
------------
florian gaud - They are available...send bid trough PM please. :)
-
oh sorry, mrcam - didn't see your reply ;)
I will check with the post office on monday with all the details and send you a PM then!
-
You are absolutely right... I will check with the post-office how much shipping will be and all the details regarding EU etc. once
I have someone interested. :)
-
Hey all!
I've gathered it all now, and here's what's included:
1x Casing (PT-10 from PacTec)
2x PCB (1x control and 1x main)
2x Aluminium cutouts, black with white writing (front and back-panel)
4x PICs - preprogrammed for the MB-6582
8x 6582A SID's, NewOld-stock
Rotary encoders with black/white Waldorf-knobs
feedback-pots with knobs
fan (with blue light if I remember correctly ;) )
tactical switches
LCD-display
DIN-contact to fit on the board (new and solid male-DIN included to fit to the PSU).
a BUNCH of other components which whould make it a 98-100% complete build out of the box
There's also included a lot of spacers, nuts, bolts, washers etc - much more then you need, but they didn't come in smaller packages ;)
Like stated before - PSU not included.
I'm not after making any money here, but I would like to break even.
If #1 in line doesn't accept, I will proceed down the que until someone does...
Everything is sold as is, but has been kept in room-temperature the whole time.
Please note that stuff aren't cheap in Norway - probably also including the shipping - so the price may seem high to some of you...
If I end up shipping outside of Norway, payment must be made trough PayPal in NOK.
Asking price is: 5000 NOK + shipping
After this, I also have some SID's left over:
tested:
4x 6582A (new-old-stock - will most likely keep at least two of these for my own MB-6582)
not tested:
6x 6581
2x 6581R3
2x 6581R4AR
5x 8580R5
1x 8580R5B
20 in total - also sold as is. Not saying any asking-price, but I'm still not looking to make money, so please send bids as PM if you are interested.
mrcam - I pass the ball to you for a reply if you are still interested...
-
hey guys!
the info/sale is a little postponed...
My parents has been placing the box on the attic after they cleaned it up, so it's... well... somewhere up there...
I'm not at their house everyday, so I don't know how fast I'll be able to pick it up...
So bottom line is I'll make a new post here as soon as I've gotten the hold of it.
But I KNOW it's up there, and I WILL sell it, so please just be patient, and I will make a new post here as soon as I have new info,
which should be within a couple of weeks I believe. :)
-
Great! :)
I'll check out the parts during the weekend and will post a reply here, but from what I remember, it's identical to Wilba's original
model (with waldorf-knobs, feedback pots etc..)
The SID's included are 8x 6582, but I can't remember if it's the A-model or not - will check this as well.
-
Hi!
When Wilba made the original batch-order for these babies, I ordered two sets (one for a friend), but he didn't want it after all. (yeah, I know... :/ )
So I basically have parts to build another one, which I'm interested in selling.
It should be 99-100% complete (there may be a resistor or two is missing, but nothing that's hard to get the hold of..)
It comes with the new-old-stock SID's, but no PSU.
Casing, PCB, 8xSID's, PIC's and everything is included.
Sold as is - but parts has been stored in room-temperature.
So first - Thorsten (and perhaps Wilba) - is it OK to sell this?
Wanted to go trough you guys first to see if anyone's interested before I post it elsewhere.
I'm located in Oslo, Norway, but will ship internationally.
-
ok, it worked on the other system running Pro Tools.
I also tried with Logic on that computer, and that also worked. But somehow, the connections aren't named the same. (Port 3 (Control) worked in PT, and Port 1 worked in Logic, without changing any wiring. Port 1 is normally an in-port on the 003R).
On the interface I plan on using (I have a 002R, but it's SO DAMN HEAVY!! :P), I only have one input and one output. But what if those are changed too? I only get one instance of my card, so it must be my input and output that is mixed up... I can't think of anything else. I'll try with a midi-monitor to see what happens after lunch...
-
hehe... it's not a dumb question :P
but yes, I have checked the channels. I tried sending the MIDI globally, on all outputs, and all channels.
The first pair of SIDs on the MB-6582 should recieve on ch.1.
If I connect a controller directly, I can only get it to play if the SID is set to ch.1
(I guess I can change on the controller to mach, though...)
I will try on a different system now and make an update..
-
no, that is not a joke ;)
ok, I uploaded the firmare a while back, and everything seemed ok.
I don't remember if I tried running any sounds from an external sequencer or not at the time, but like now - if I connect a keyboard, it plays perfectly. But if I try to connect it to a MIDI interface (the same one I used to upload the firmware), it doesn't respond to MIDI-data at all. I tried playing notes, and program changes from the programs mentioned above.
So that's why I think it's weird... If it recieves midi from a sequencer, it doesn i't work, but when I play on it directly from a controller (USB MIDI-keyboard, or a synth etc.), it plays, and changes program number...
Sorry for the bad info... Please let me know if there are anything else you need to know..
I am at the moment running SIDv2RC17 (I know it's not the newest, but I'll try an update later today if I still can't get it to play from a sequencer).
-
Hi!
My MB-6582 are unable to recieve MIDI from any sequencer.
It plays perfectly when I try to run the MIDI-cable directly from a controller, but it won't play
from any software. Is there anything I need to enable on the MB-6582?
I've tried running MIDI from Logic 8, Sibelius and Live, and will try from Pro Tools trough my Digidesign card later today. (tried running trough a MIDI-controller and a TerraTec card without success)
Fast help is much wanted, cause I plan to use it on my keyboard-exam on friday :P
-
hey all! :)
Just finished my 6582 today (yay! :D)
allthough, I found another bug on the base PCB.
as mentioned, you need to solder a bridge between pin 9 and 12 at J15.
This connects +5V to the backlight, but I also had to solder a bridge between pin 10 and 11 (GND) to make it work.
Wilba, can you check if this is just something I had to do, or if it is an error?
Anyway, I love how it has turned out, and I will post pictures if anyone's interested(?) :)
Lars
-
good point, nILS... I'll check it out some more and come back to you :-)
-
Hi!
I was minding my own business the other day, when I saw that my PSU for my external LaCie HDD had a plug with 4 pins. Turns out it delivers 12V and 5V (2A on each, so that's enough..)
Anyway, these PSU's are available online for $20 (see link)
http://www.lacie.com/products/product.htm?pid=10735
So I was wondering if they could be a good alternative to the original C64 PSU?
I'm probably going to just use 6582's or 8580's in the second MB-6582 I'm building, so if anyone could confirm this and help me with the internal PSU for the MB-6582 (Wilba?) to make it work, I'd be happy to try it out!
Might also be a great PSU for future 6582 builders!
The size is like a normal laptop-PSU, so it would be pretty neat!
Will probably last a lot longer then the C64 one too.
The plug could of course be changed to a 7-pin DIN (I could get one at a local store since I allready have the 7-pin PCB mount plug) - or something else.
Any thoughts? :)
-
Since it takes a lot of time to put this kits together, you will get an email from smash when your kits are ready.
The email contains information on how to order them. (sub-page in his shop with a special order-code for verification)
I believe this thread only applies to the people that allready have the PCB's from the original bulk-order, and there only
exsists a BASE PCB parts kit per date.
After all the part kits for the base pcb has gone out, he will probably concider making a CS PCB parts kit.
Be patient - it takes a lot of time to gather all the parts!
Finally, the PCB's (then - 2nd edition) + probably part kits will be available in his shop.
My advice: If you don't have the PCB's from the original bulk-order, you might as well wait until it becomes available
in his shop (allthough, there are nice to see that there are so many interested in building the MB-6582).
Be patient - this takes a lot of time! ;)
-
Hi!
I'm building two 6582's (one for my teacher, and one for me), and I'm probably interested in getting one of the panel sets re-screened.
Since I'm almost at the CS-stage, I will probably finish the first one with the "old" screening, and use the new and hopefully better screening for my self ;)
Thanks a lot for this, a great initiative! :)
Selling my MB-6582
in Fleamarket
Posted
Hi!
Thank you for your interest, but the unit was sold a few days ago.
Lars